Citation: | MO Jiliang, ZHU Minhao. Tribological Properties of CrN Coatings Prepared by Physical Vapor Deposition[J]. Journal of Southwest Jiaotong University, 2008, 21(2): 280-284. |
CUNHA L,ANDRITSCHKY M,PISCHOW K,et al.Microstructure of CrN coatings produced by PVD techniques[J].Thin Solid Films,1999,355-356:465-471.[2] NAVINSEK B,PAN JAN P,CVELBAR A.Characterization of low temperature CrN and TiN (PVD) hard coatings[J].Surface and Coatings Technology,1995,74(1-3,Part 1):155-161.[3] HOY R,SLOOF W G,JANSSEN G C A M.Hard dense CrN.coatings on three-dimensional objects[J].Surface and Coatings Technology,2004,179(2-3):215-222.[4] PIOT O,GAUTIER C,MACHET J.Comparative study of CrN coatings deposited by ion plating and vacuum are evaporation.Influence of the nature and the energy of the hyer-forming speeies on the structural and mochanical properties[J].Surface and Coatings Technology,1997,94-95 (1-3):409-415.[5] GAUTIER C,MOUSSAOUI H,ELSTNER F.Comparative study of mechanical and structural properties of CrN films deposited by d.e.magnetron sputtering and vacuum are evaporation[J].Surface and Coatings Technology,1996,86-87(1-3,Part 1):254-262.[6] NAVINSEK B,PAN JAN P.Oxidation of CrN,hard coatings reactively sputtered at low temperature[J].Thin Solid Films,1993,223(1):4-6.[7] SU Y L,YAO S H,WU C T.Comparisons of eharaeterizatiorm and tribological performance of TiN and CrN deposited by cathodic are plasma deposition process[J].Wear,1996,199(1):132-141.[8] 莫继良,朱曼昊,安剑,等.物理气相沉积CrN涂层的研究进展[J].中国表面工程,2006,19(4-11):71-75.MO Jiliang,ZHU Minhao,AN Jian,et al.Development in PVD CrN Coating[J].China Surf.Eng.,2006,19 (4-11):71-75.[9] KONYASHIN I,FOX-RABINOVICH G,DODONOV A.TiN thin films deposited by filtered are-evaporation:structure,properties and applications[J].J.Materials Science,1997,32(22):6 029-6 038.[10] MARTIN P J,BENDAVID A.Review of the filtered vacuum are process and materials deposition[J].Thin solid films,2001,394(1-2):1-15.[11] HARRIS S G,DOYLE E D,VLASVELD A C,et al.Dry cutting performance of partially filtered are deposited titanium aluminium nitride coatings with various metal nitride base coatings[J].Surface and Coatings Technology,2001,146-147(9-10):305-311.
|
[1] | WEI Yapeng. Study on Uniaxial Tensile Test and Constitutive Model of Steel Structure Coating[J]. Journal of Southwest Jiaotong University. doi: 10.3969/j.issn.0258-2724.20230591 |
[2] | ZHOU Ning, ZHI Xingshuai, ZHANG Jing, ZHENG Wei, LUO Chaoji, ZHANG Weihua. Friction and Wear Performance of Pantograph-Catenary System in Electrified Railways: State of the Art[J]. Journal of Southwest Jiaotong University, 2024, 59(5): 990-1005, 1022. doi: 10.3969/j.issn.0258-2724.20220053 |
[3] | LIN Zhibin, GAO Hongli, WU Yudong, TAN Yongwen. Denoising of Acoustic Emission of Diamond-Coated Mechanical Seals Wear Based on Empirical Wavelet Transform and Kullback-Leibler Divergence[J]. Journal of Southwest Jiaotong University, 2024, 59(1): 177-184. doi: 10.3969/j.issn.0258-2724.20210599 |
[4] | LIN Pengzhen, WEI Yapeng, QIAO Yewei. Interfacial Stress and Failure Criteria of Steel Structure Coatings Under Wind-Sand Erosion[J]. Journal of Southwest Jiaotong University, 2023, 58(1): 236-243. doi: 10.3969/j.issn.0258-2724.20210189 |
[5] | LIU Yicen, WU Guangning, GUO Yujun, LIU Yijie, WEI Wenfu, LEI Xiao, LI Peidong. Motion Characteristics Analysis of DC Arc on Arcing Horn[J]. Journal of Southwest Jiaotong University, 2023, 58(1): 40-47. doi: 10.3969/j.issn.0258-2724.20210156 |
[6] | GUO Yunlong, WANG Xinyu, LIAN Dong, WAN Hongyu, JING Guoqing. Lateral Resistance of Frictional Sleeper Ballast Bed[J]. Journal of Southwest Jiaotong University, 2022, 57(2): 301-305, 368. doi: 10.3969/j.issn.0258-2724.20200464 |
[7] | ZHANG Mingyuan, LU Liantao, ZENG Dongfang, CHEN Gang, ZHANG Jiwang. Effect of Rolling Direction Reversal on Friction and Wear Behavior of Wheel Steel[J]. Journal of Southwest Jiaotong University, 2017, 30(1): 106-111,126. doi: 10.3969/j.issn.0258-2724.2017.01.015 |
[8] | LI Qiuze, WANG Wenjing, CHEN Liang, SUN Shouguang. Fatigue Pitting Failure Analysis of Tooth Surface of Spiral Bevel Gear for EMU Train[J]. Journal of Southwest Jiaotong University, 2016, 29(6): 1206-1213. doi: 10.3969/j.issn.0258-2724.2016.06.022 |
[9] | HUANG Qiang, FAN Dongming. Comparison of Short Arc Integral Approach and Average Acceleration Approach in Gravity Field Recovery[J]. Journal of Southwest Jiaotong University, 2013, 26(3): 455-459,480. doi: 10.3969/j.issn.0258-2724.2013.03.010 |
[10] | WANG Wenjian, WANG Hong, LIU Qiyue. Effect of Wheel Material on Rolling Friction and Wear Behaviors of Wheel/Rail Rollers[J]. Journal of Southwest Jiaotong University, 2013, 26(5): 909-914. doi: 10.3969/j.issn.0258-2724.2013.05.020 |
[11] | ZHOU Ling-Yuan, LI Jiao, LI Tong-Mei. Improved Arc-Length Method for Solving Buckling Problem[J]. Journal of Southwest Jiaotong University, 2011, 24(6): 922-925. doi: 10.3969/j.issn.0258-2724.2011.06.005 |
[12] | LIN Xiu-Zhou, CAI Zhen-Bing, HE Li-Ping, YI Jing-Hua, XIE Xin-Yuan, SHU Min-Hao. Simulation and Experimental Investigation of Tortional Wear Corrosion at Constant Temperature[J]. Journal of Southwest Jiaotong University, 2011, 24(1): 132-137. doi: 10.3969/j.issn.0258-2724.2011.01.021 |
[13] | CHEN Hui, GOU Guoqing, LIU Yan, TU Mingjing. Formation and Strengthening Mechanisms of Plasma Sprayed Nanostructured WC-Co Coating[J]. Journal of Southwest Jiaotong University, 2008, 21(5): 633-637. |
[14] | DUGui-ping, HUANG Shi-sheng, WANG Zhen-min. A Novel Zero-Voltage Soft-Switching Arc Welding Inverter Based on Peak-Current Mode[J]. Journal of Southwest Jiaotong University, 2002, 15(3): 277-280. |
[15] | ZHOU You-long, WANG Yuan-liang, HUJiu-fu. Experimental Study on Welding of D6AC Ultra-high Strength Steel with Thin-Wire Tandem Sequence Submerged Arc Welding[J]. Journal of Southwest Jiaotong University, 2002, 15(2): 134-147. |