Evaluation Model of Critical Thermal Shock Resistance Temperature Difference for Engineering Ceramics
-
摘要: 针对当前工程陶瓷抗热震理论无法定量分析材料热震性能的不足,在传统热震理论和已有研究的基础上,提出了一种新型研究工程陶瓷抗热震性能的理论模型.该模型可通过材料的力学、热学参数计算其临界抗热震温差,并首次讨论了断裂韧性对材料热震性能的影响.借助该模型不仅可定性判断材料热震性能的优劣,而且可半定量地评价其临界抗热震温差的大小.对几种具有不同特征(致密、多孔)、不同结构(块体、层状)的陶瓷系列进行热震评估实验,结果证明,计算值与实验值较为吻合,平均误差率约为5%.Abstract: Traditional thermal shock resistance theories cannot be used for quantitative evaluation of thermal shock property of ceramics. To solve this problem, a novel model of thermal shock resistance for engineering ceramics was developed on the basis of traditional theories and previous research achievements. In this model, the critical thermal shock resistance temperature difference Tc was calculated using mechanical and thermal parameters of ceramics, and the effect of fracture toughness on thermal properties was discussed for the first time. The model can be used for qualitative and even half quantitative evaluation of the thermal shock property of ceramics. To verify the proposed model, thermal shock resistance experiments were performed on different series of ceramics, including those with different characteristics (dense and porous ceramics) and those with different typical structures (bulk and laminated ceramics). The results indicate that the experimental Tc was close to the calculated value, with an average error rate of about 5%.
-
周玉. 陶瓷材料学 [M]. 1版.哈尔滨: 哈尔滨工业大学出版社, 1995: 468-474. KINGERY W D. Factor affecting thermal stress resistance of ceramic materials HASSELMAN D P H. Thermal shock by radiation heating [J]. Journal of the American Ceramic Society, 1955, 38: 3-15. HASSELMAN D P H. Unified theory of thermal shock fracture initiation and crack propagation in brittle ceramics EVANS A G. Thermal shock fracture in ceramic materials EMERY A F. Thermal stresses in severe environment [J]. Journal of the American Ceramic Society, 1963, 46(5): 229-304. SCHMITT N, BURR A, BERTHAUD Y, et al. Micromechanics applied to the thermal shock behavior of refractory ceramics LI Weiguo, YANG Fan, FANG Daining. Thermal shock modeling of ultra-high temperature ceramics under active cooling [J]. Journal of the American Ceramic Society, 1969, 52(11): 600-604. HAMIDOUCHE M, BOUAOUADJA N, OLAGNON C G, et al. Thermal shock behaviour of mullite ceramic [J]. Proceedings of the British Ceramic Society, 1974, 25: 217-237. HAN Jiecai, WANG Baolin. Thermal shock resistance of ceramics with temperature-dependent material properties at elevated temperature SHERMAN D. SCHLUMM D. Thickness effect in thermal shock of alumina ceramics 赵军, 刘爱萍, 艾兴, 等. 陶瓷材料的抗热震参数 [M]. New York: Plenum Press, 1980: 95-121. MENG Songhe, LIU Guoqian, GUO Yue, et al. Mechanisms of thermal shock failure for ultra-high temperature ceramic [J]. Mechanics of Materials, 2002, 34(11): 725-747. 宋久鹏, THIERRY B, 柳葆生, 等. 氧化铝陶瓷粉末固相烧结过程模拟 ZHOU Zehua, DING Peidao, TAN Shouhong, et al. A new thermal-shock-resistance model for ceramics: establishment and validation ZHOU Zehua, WANG Zehua, YI Yu, et al. A thermal-shock-resistance model for laminated ceramics and its validation [J]. Computers and Mathematics with Applications, 2009, 58(11/12): 2373-2378. BINNER G P, STEVENS R, The measurement of toughness by indentation [J]. Ceramics International, 2003, 29(6): 599-609. OSTERSTOCK F. Contact damage submitted to thermal shock: a method to evaluate and simulate thermal shock resistance to brittle materials [J]. Acta Materialia, 2011, 59(4): 1373-1382. [J]. Scripta Materialia, 2000, 42(8): 819-825. [J]. 山东大学学报:工学版, 2003, 33(3): 231-234. ZHAO Jun, LIU Aiping, AI xing, et al. Thermal shock resistance parameters of ceramic materials [J]. Journal of Shandong University: Engineering Science, 2003, 33(3): 231-234. [J]. Materials and Design, 2009, 30(6): 2108-2112. [J]. 西南交通大学学报, 2008, 43(2): 275-279. SONG Jiupeng, THIERRY B, LIU Baosheng, et al. Numerical simulation for solid-state sintering processes of alumina ceramic powders [J]. Journal of Southwest Jiaotong University, 2008, 43(2): 275-279. [J]. Materials Science and Engineering A, 2005, 405(1/2): 272-276. [J]. Journal of the European Ceramic Society, 2010, 30(66): 1543-1547. [J]. Transactions and Journal of the British Ceramic Society, 1984, 83(6): 168-172. [J]. Materials Science and Engineering A, 1993, 168(1): 41-44.
点击查看大图
计量
- 文章访问数: 933
- HTML全文浏览量: 53
- PDF下载量: 298
- 被引次数: 0