涡轮叶片逆向建模与特征参数提取

赖喜德; 李广府; 张惟斌; 陈小明; 宋威; 江海

doi:10.3969/j.issn.0258-2724.2013.05.021

涡轮叶片逆向建模与特征参数提取

doi: 10.3969/j.issn.0258-2724.2013.05.021

基金项目:

国家自然科学基金资助项目(51379179)

四川省教育部共建重点实验室资助项目(SBZDPY-11-7)

四川省教育厅成果转化培育资助项目(11ZZ002)

计量
- 文章访问数: 1021
- HTML全文浏览量: 65
- PDF下载量: 459
- 被引次数: 0
出版历程
- 收稿日期: 2012-09-17
- 刊出日期: 2013-10-25

3D Model Reconstruction and Its Feature Parameters Extraction of a Turbine Blade

摘要

摘要: 为了在已有涡轮叶片实物基础上进行再创新设计,采用激光扫描仪对涡轮叶片进行数字化扫描,提出了在三维测量得到涡轮叶片点云数据的基础上,准确进行逆向建模、反求几何参数和提取气动特征参数的逆向设计方法.根据涡轮叶片的几何参数反求和提取气动特征参数要求,基于获取涡轮叶片的截面点云图,用五次多项式曲线拟合叶盆和叶背,并用圆弧逼近叶形前后缘.基于该方法,采用Matlab软件对涡轮截面线点云进行拟合,反求得到了叶身型线方程,拟合偏差控制在之内,能够获得准确的叶片截面型线和气动特征参数.
- 涡轮叶片 /
- 逆向工程 /
- 叶身型线 /
- 特征参数提取 /
- 五次多项式拟合
Abstract: In order to achieve an innovation design of turbine blades, the point cloud data of an existing turbine blade was digitally acquired by a handy laser scanner, and then a reverse design methodology was proposed to accurately reconstruct a 3D digital model and extract the geometric and aerodynamic feature parameters from the point cloud data. In order to obtain the blade section profiles and extract the geometric and aerodynamic feature parameters accurately, using the point cloud data of the turbine blade, the pressure side and suction side were fitted with quintic polynomial curves, and the trailing and leading edges were approximated with the arc. The results show that using the methodology, the curve equation of blade section profiles can be approximated with a deviation in the range of with Matlab software, and the geometric and aerodynamic feature parameters can be extracted from these curve equations accurately.
- turbine blade /
- reverse engineering /
- blade profiles /
- feature parameter extraction /
- quintic polynomial fitting

HTML全文

参考文献(17)

吴立强,尹泽勇,蔡显新. 航空发动机涡轮叶片的多学科设计优化[J]. 航空动力学报,2005,20(5): 795-801. WU Liqiang, YIN Zeyong, CAI Xianxin. MDO technology applied to the aeroengine turbine blade design[J]. Journal of Aerospace Power, 2005, 20(5): 795-801.

王正明,贾希诚. 涡轮叶片的解析成型与优化设计方法[J]. 工程热物理学报,2001,22(5): 569-573. WANG Zhengming, JIA Xicheng. Analytical generating method and optimum design of turbine blades[J]. Journal of Engineering Thermophysics, 2001, 22(5): 569-573.

虞跨海,李立州,岳珠峰. 基于解析及特征造型的涡轮冷却叶片参数化设计[J]. 推进技术,2007,28(6): 637-641. YU Kuahai, LI Lizhou, YUE Zhufeng. Parametric design for cooling turbine blades based on analytic and feature modeling[J]. Journal of Propulsion Technology, 2007, 28(6): 637-641.

YILMAZ O, GINDY N, GAO Jian. A repair and overhaul methodology for aeroengine components[J]. Robotics and Computer-Integrated Manufacturing, 2010, 26(2): 190-201.

BRUJIC D, AINSWORTH I, RISTIC M. Fast and accurate NURBS fitting for reverse engineering[J]. The International Journal of Advanced Manufacturing Technology, 2011, 54(5): 691-700.

YIN Z W, XIONG Y Q. Geometric algorithms for direct integration of reverse engineering and rapidly reconfigurable mold manufacturing[J]. The International Journal of Advanced Manufacturing Technology, 2011, 56(5/6/7/8): 721-727.

于之靖,宋四同,王涛,等. 基于逆向工程的航空发动机叶片数字化建模[J]. 机床与液压,2011,39(17): 122-125. YU Zhijing, SONG Sitong, WANG Tao, et al. Digital modeling of aircraft engine blade based on reverse engineering[J]. Machine Tool & Hydraulics, 2011, 39(17): 122-125.

MOHAGHEGH K, SADEGHI M H, ABDULLAH A. Reverse engineering of turbine blades based on design intent[J]. International Journal of Advanced Manufacturing Technology, 2007, 32(9): 1009-1020.

MOHAGHEGH K, SADEGHI H M, ABDULLAH A, et al. Improvement of reverse-engineered turbine blades using construction geometry[J]. The International Journal of Advanced Manufacturing Technology, 2010, 49(5/6/7/8): 675-687.

GAO J, CHEN X, YILMAZ O, et al. An integrated adaptive repair solution for complex aerospace components through geometry reconstruction[J]. International Journal of Advanced Manufacturing Technology, 2008, 36(11/12): 1170-1179.

BAGCI E. Reverse engineering application for recovery of broken or worn parts and re-manufacturing: three case studies[J]. Advances in Engineering Software, 2009, 40(6): 407-418.

BARBERO R B. The recovery of design intent in reverse engineering problems[J]. Computer & Industrial Engineering, 2009, 56(4): 1265-1275.

陈志杨,张三元,叶修梓. 点云数据空洞区域的自动补测算法[J]. 计算机辅助设计与图形学学报,2005,17(8): 1793-1797. CHEN Zhiyang, ZHANG Sanyuan, YE Xiuzi. An algorithm for automatic filling of holes of point cloud in reverse engineering[J]. Journal of Computer-Aided Design & Computer Graphics, 2005, 17(8): 1793-1797.

陈志强,张定华,金炎芳,等. 基于测量数据的叶片界面特征参数提取[J]. 科学技术与工程,2007,7(9): 1791-1795. CHEN Zhiqiang, ZHANG Dinghua, JIN Yanfang, et al. Cross-sectional feature parameter extraction of blade based on measurement data[J].Science Technology and Engineering, 2007, 7(9): 1791-1795.

高吭,李玉柱,佟金. 东方蝼蛄前胸背板外轮廓数据采集与量化分析[J]. 农业工程学报,2011,27(8): 201-205. GAO Hang, LI Yuzhu, TONG Jin. Profile data acquisition and quantitative analysis of the pronotum of oriental mole cricket[J]. Transactions of the CASE, 2011, 27(8): 201-205.

田怀文,郭仁章. 反求建模中常见二次曲面拟合方法[J]. 西南交通大学学报,2007,42(5): 553-557. TIAN Huaiwen, GUO Shizhang. Research on algorithm of quadric surface fitting in reverse modeling for mechanical parts[J]. Journal of Southwest Jiaotong University, 2007, 42(5): 553-557.

吴禄慎,高红卫,孟凡文. NURBS曲面重构与点云-曲面误差分析[J]. 激光与红外,2010,40(10): 1131-1135. WU Lushen, GAO Hongwei, MENG Fanwen. NURBS surface reconstruction and point cloud-surface error analysis[J]. Laser & Infrared, 2010, 40(10): 1131-1135.

施引文献

附加材料(0)

访问统计

点击查看大图

计量

文章访问数: 1021
HTML全文浏览量: 65
PDF下载量: 459
被引次数: 0

涡轮叶片逆向建模与特征参数提取

doi: 10.3969/j.issn.0258-2724.2013.05.021

计量

出版历程

3D Model Reconstruction and Its Feature Parameters Extraction of a Turbine Blade

计量

出版历程

目录