SS3B和DF8B机车的整体碾钢轮踏面剥离失效分析

王玉辉; 何国旗

doi:10.3969/j.issn.0258-2724.2013.05.019

SS3B和DF8B机车的整体碾钢轮踏面剥离失效分析

doi: 10.3969/j.issn.0258-2724.2013.05.019

王玉辉¹,
何国旗^2,3, ,

基金项目:

国家"973"计划重点基础研究发展项目(2011CB706800)

国家自然科学基金资助项目(51375159)

湖南省高等学校科学研究项目(12A038)

湖南省教育厅科学研究项目(13C595)

详细信息

通讯作者:
何国旗(1967-),男,教授,研究方向为机械设计与制造, E-mail:tjhgq@163.com

计量
- 文章访问数: 856
- HTML全文浏览量: 64
- PDF下载量: 450
- 被引次数: 0
出版历程
- 收稿日期: 2012-03-05
- 刊出日期: 2013-10-25

Causes Analysis of Tread Spalling Defects on Solid Rolled Wheels of SS3B and DF8B Locomotives

WANG Yuhui¹,
HE Guoqi^{2,3
, ,}

摘要

摘要: 为了查明机车车轮发生踏面剥离故障的原因,分别对SS3B机型的SS3B31024047车轮和DF8B机型的DF8B32774060、DF8B31644017车轮产生踏面剥离的整体碾钢轮取样,按TJZL-01-98规定的理化检验项目进行取样和常规检验,并对剥离区域的宏观形貌、金相组织进行光学显微镜观察、电子扫描分析.检验结果表明: DF8B32774060车轮踏面表面金属主要在接触应力作用下发生塑性变形,属于接触疲劳剥离; DF8B31644017和SS3B31024047车轮由于剥离区存在塑性变形层,属于热疲劳剥离;对接触疲劳剥离,应改善车轮钢的成分、改进车轮热处理和踏面加工工艺,对热疲劳剥离,应改变制动方式和优化牵引运行.
- 整体碾钢轮 /
- 踏面剥离 /
- 剥离区域
Abstract: In order to find out the causes of locomotive wheel tread spalling defects, the tread spalling of solid rolled wheels were sampled for routine examinations, including the SS3B31024047 wheels of the SS3B locomotive, the DF8B31644017 wheels and the DF8B32774060 wheels of the DF8B locomotive. The macroscopic feature and microstructure of the tread spalling area were analyzed in terms of the TJZJ-01-98, with light micro-scope observation and electronic scanning. The test results show that the surface metal of DF8B32774060 wheels mainly underwent plastic deformation under contact stress, and the spalling was caused by the rolling contact fatigue. However, SS3B31024047 and DF8B31644017 wheels' tread spalling was attributed to the plastic deformation layer in the tread spalling area caused by thermal fatigue. Therefore, reduction of the wheel tread spalling caused by the rolling contact fatigue could be achieved by adjustment of the chemical composition of steel, improvement of the heat treatment and tread processing technologies of wheels; and the thermal fatigue spalling can be alleviated by changing the braking mode and optimizing the traction operation.
- solid rolled wheel /
- tread spalling /
- spalling area

HTML全文

参考文献(15)

王玉辉. 机车整体车轮踏面剥离原因分析与研究[J]. 铁道机车车辆,2012,32(1): 87-88. WANG Yuhui. Reason analysis and research for tread peeling on locomotive solid wheel[J]. Railway Locomotive & Car, 2012, 32(1): 87-88.

郭俊. 轮轨滚动接触疲劳损伤机理研究[D].成都:西南交通大学,2006.

卢立丽. 货车车轮踏面制动热损伤研究[D].北京:北京交通大学,2007.

温泽峰. 钢轨波浪形磨损研究[D].成都:西南交通大学,2006.

赵金光. DF11G型机车轮对踏面剥离成因探讨[J]. 内燃机车,2006(5): 25-27. ZHAO Jinguang. Discussion on cause of wheel tread shelled-out for DF11G locomotive[J]. Diesel Locomotives, 2006(5): 25-27.

王文健,刘启跃. 车轮剥离性能试验研究[J]. 西南交通大学学报,2005,40(2): 228-231. WANG Wenjian, LIU Qiyue. Experimental investigation on spalling of railway car wheels[J]. Journal of Southwest Jiaotong University, 2005, 40(2): 228-231.

崔银会,张斌. 200 km/h轻型客车车轮踏面剥离原因分析[J]. 轧钢,2003,20(3): 13-15. CUI Yinhui, ZHANG Bin. Analysis of the shelling causes of wheel tread of 200km/h light passenger train[J]. Steel Rolling; 2003, 20(3): 13-15.

赵雪芹. 钢轨接触疲劳裂纹形成机理研究[D].成都:西南交通大学,2007.

马卫华,罗世辉,王自力. 提速机车车轮踏面剥离问题研究[J]. 电力机车与城轨车辆,2005(5): 37-40. MA Weihua, LUO Shihui, WANG Zili. Research on wheel tread spalling with the raising speed locomotive[J]. Electric Locomotives & Mass Transit Vehicles, 2005(5): 37-40.

彭庆珩,张汉波. DF8B机车轮对踏面剥离的原因分析及对策[J]. 上海铁道科技, 2007(01): 96-97. PENG Qinghang, ZHANG Hanbo. Reason analysis and method for tread peeling on DF8B locomotive wheel[J]. Shanghai Railway Science & Technology, 2007(01): 96-97.

严中明. HXD1C型机车车轮踏面剥离问题的探讨[J]. 铁道机车车辆, 2012,32(5): 58-61. YAN Zhongming. Discussion of wheel thread detachment of HXD1C locomotives[J]. Ralway Locomotive ＆ Car, 2012, 32(5): 58-61.

张斌,付秀琴. 铁路车轮、轮箍踏面剥离的类型及形成机理[J]. 中国铁道科学,2009,22(2): 73-78. HANG Bin, FU Xiuqin. Type and formation mechanism of railway wheel and tire tread spall[J]. China Railway Science, 2009, 22(2): 73-78.

刘启跃,周仲荣. 受制滚动钢摩擦副的摩擦特性研究[J]. 机械工程学报,2003,39(7): 56-67. LIU Qiyue, ZHOU Zhongrong. Investigation of friction characteristic of steels under rolling-sliding contion[J]. Journal of Mechanical Engineering, 2003, 39(7): 56-67.

李自彬. 车轮钢滚动磨损特性研究[D].成都:西南交通大学,2010.

王蕴华. 车轮钢滚动磨损与摩擦特性研究[D].成都:西南交通大学,2009.

施引文献

附加材料(0)

访问统计