注射成形填充模拟的修正算法

石建军; 成志强; 柳葆生

doi:10.3969/j.issn.0258-2724.2012.06.009

注射成形填充模拟的修正算法

doi: 10.3969/j.issn.0258-2724.2012.06.009

基金项目:

高等学校博士基金资助项目(20110184110017)

计量
- 文章访问数: 1358
- HTML全文浏览量: 59
- PDF下载量: 557
- 被引次数: 0
出版历程
- 收稿日期: 2011-04-20
- 刊出日期: 2012-12-25

Modified Algorithm for Simulation of Injection Molding Process

摘要

摘要: 为提高注射成形过程数值模拟结果的准确性,采用类似迎风法的概念,通过对平流方程作为填充状态控制方程而导致模拟失真原因的分析,提出了相应的数值修正算法.该方法在高效显式数值模拟算法和有限元软件基础上,通过对模型内流体速度场的系统性操作,削弱空气流动速度场对喂料填充的不真实影响,使得填充状态的输送更基于流动前沿面后部的流场作用,并对⊥型和L型模腔进行了数值仿真.结果表明:该方法能有效抑制填充流的失真现象,实现了在流动过程中流向发生大角度变化模腔的正确填充过程.
- 注射成形 /
- 数值模拟 /
- 显式算法 /
- 迎风法
Abstract: In order to improve the accuracy of numerical simulation for injection molding process, a notion similar to upwind method was introduced. As the governing equation of the filling state takes the form of an advection equation, distorted simulation result may be induced by the flow of air in the mold cavity. To solve the problem, a numerical correction method was proposed. This method weakens the adverse effect of air flow velocity field on the filling process, by modifying the fluid velocity field through systematic operations based on an efficient explicit algorithm and finite element software. Thus, the advection of filling state mainly depends on the flow field behind the filling front. In addition, a numerical simulation was made in mold cavities of shapes ⊥ and L to verify the effectiveness of the method. The result shows that the proposed method can suppress the distortion phenomenon of filling flow effectively, and ensure a correct filling process in complex channels, in which the flow directions have large-angel changes.
- injection molding /
- numerical simulation /
- explicit algorithm /
- upwind method

HTML全文

参考文献(15)

GERMAN R M, BOSE A. Injection moulding of metals and ceramics[M]. Princeton: MPIF, 1997: 95-130.

GREINER A, KAUZLARIC D, KORVINK J G. Simulation of micro powder injection moulding: Powder segregation and yield stress effects during form filling[J]. Journal of the European Ceramic Society, 2011, 31(14): 2525-2534.

ROKKAM R G, FOX R O, MUHLE M E. Computational fluid dynamics and electrostatic modeling of polymerization fluidized-bed reactors[J]. Powder Technology, 2010, 203(2): 109-124.

NAGAIAH C, WARNECKE G, HEINRICH S, et al. Numerical simulation of temperature and concentration distributions in fluidized beds with liquid injection[J]. Chemical Engineering Science, 2007, 62(6): 1567-1590.

柳葆生, BARRIERE T, GELIN J C. 金属注射成形的数值模拟和高效算法[J]. 中国机械工程,2002,13(22): 1907-1910. LIU Baosheng, BARRIERE T, GELIN J C. Numerical simulation of metal injection molding and efficient algorithm[J]. China Mechanical Engineering, 2002, 13(22): 1907-1910.

LARSEN G, CHENG Z Q, BARRIERE T, et al. A streamline-upwind model for filling front advection in powder injection moulding//Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor ZIENKIEWICZ O. C. (1921-2009). : AIP Conference Proceedings, 2010, 1252: 545-552.

LAVAL H, QUARTAPELLE L. A fractional step Taylor-Galerkin method for unsteady incompressible flows[J]. Int. J. for Numerical Methods in Fluids, 1990, 11(5): 5012513.

CHENG Z Q, BARRIERE T, LIU B S, GELIN J C. A new explicit simulation for injection molding and its validation[J]. Polymer Engineering & Science, 2009, 49(6): 1243-1252.

石建军,成志强,柳葆生. 微注射成形中表面张力效应的数值模拟[J]. 应用力学学报,2010,27(4): 723-727. SHI Jianjun, CHENG Zhiqiang, LIU Baosheng. Numerical analysis to surface tension effects of micro-injection molding[J]. Chinese Journal of Applied Mechanics, 2010, 27(4): 723-727.

成志强,BARRIERE T, 柳葆生,等. 基于全矢量显式算法注射填充软件的研究与开发[J]. 应用力学学报,2005,22(2): 175-179. CHENG Zhiqiang, BARRIERE T, LIU Baosheng, et al. Research and development of a simulation solver with fully vectorial explicit algorithm for injection molding[J]. Chinese Journal of Applied Mechanics, 2005, 22(2): 175-179.

PARK C H, BOTTCHER N, WANGA W, KOLDITZ O. Are upwind techniques in multi-phase flow models necessary[J]. Journal of Computational Physics, 2011, 230(22): 8304-8312.

MAHENDRA A K, SINGH R K, GOUTHAMAN G. Meshless kinetic upwind method for compressible, viscous rotating flows[J]. Computers & Fluids, 2011, 46(1): 325-332.

胡健伟,田春松. 对流-扩散问题的 Galerkin 部分迎风有限元方法[J]. 计算数学,1992,14(4): 446-459. HU Jianwei, TIAN Chunsong. Galerkin partial upwind finite element method for the convection-diffusion equations[J]. Mathematica Numerica Sinica, 1992,14(4): 446-459.

SHAH A, LI Yuan, KHAN A. Upwind compact finite difference scheme for time-accurate solution of the incompressible Navier-Stokes equations[J]. Applied Mathematics and Computation, 2010, 215: 3201-3213.

成志强,BARRIERE T,柳葆生,等. 模腔注射模拟显式算法中对流项作用的评估[J]. 西南交通大学学报,2007, 39(4): 442-446. CHENG Zhiqiang, BARRIERE T, LIU Baosheng, et al. Evaluation of effect of advection term in simulation of mould filling by explicit algorithm[J]. Journal of Southwest Jiaotong University, 2007, 39(4): 442-446.

施引文献

附加材料(0)

访问统计

点击查看大图

计量

文章访问数: 1358
HTML全文浏览量: 59
PDF下载量: 557
被引次数: 0

注射成形填充模拟的修正算法

doi: 10.3969/j.issn.0258-2724.2012.06.009

计量

出版历程

Modified Algorithm for Simulation of Injection Molding Process

计量

出版历程

目录