基于群体遗传进化机制的产品族设计

聂涌; 殷国富; 赵秀粉

doi:10.3969/j.issn.0258-2724.2012.03.027

基于群体遗传进化机制的产品族设计

doi: 10.3969/j.issn.0258-2724.2012.03.027

基金项目:

国家自然科学基金资助项目(51075287)

四川省产业发展重大关键技术项目(2010GZ0051)

详细信息

作者简介:
聂涌(1983-),男,博士研究生,研究方向为CAD/CAE、产品族设计等,电话:13730641991,E-mail:xiaodanyong@163.com

通讯作者:
赵秀粉(1977-),女,讲师,博士,研究方向为产品智能设计,E-mail:zhaoxiufen@scu.edu.cn

计量
- 文章访问数: 1583
- HTML全文浏览量: 86
- PDF下载量: 514
- 被引次数: 0
出版历程
- 收稿日期: 2011-05-27
- 刊出日期: 2012-06-25

Product Family Design Based on Mechanism of Population Evolution

摘要

摘要: 为快速响应细分市场中客户的个性化需求,运用生物进化理论建立了产品族进化设计过程模型.在定义产品基因、产品等位基因概念的基础上,建立了4层结构体系的新产品族遗传结构.通过定量分析市场客户需求和产品生产效率,构建了产品族在市场环境中的客户需求维度适应度模型和在设计制造环境中的生产效率维度适应度模型,并提出了支持整个产品族进化的多方向进化演变算法.以轿车产品族设计为例的产品族进化演变过程模拟结果表明:产品族经过20代进化后,最终形成了分别满足小型、紧凑型及中型轿车3个细分市场需求且具有较高生产效率的最优产品族,本文提出的产品族进化设计方法能有效地满足细分市场中客户的个性化需求.
- 产品族设计 /
- 进化 /
- 产品生态环境 /
- 适应度
Abstract: In order to attain a rapid response to customers' individualized needs in market segments, a process model of product family evolutionary design was established according to the biological evolutionism. Based on the definitions of product genes and product allelic genes, a new four-layer product family genetic structure was built. In addition, product family fitness models in two dimensions, i.e., customer needs in marketplace and production efficiency in design and manufacture environment, were constructed by quantitative analysis of customer needs in market and the production efficiency. Meanwhile, a multi-directional evolution algorithm that supports the whole product family evolution was proposed. Taking a car product family design for example, simulation results of the product family evolutionary process show that after 20 generations, the product family develops into the optimal solution which meets the needs in small, compact and medium car market segments and has high product efficiency. Therefore, the method proposed for product family evolutionary design can effectively meet customers' individualized needs in market segments.
- product family design /
- evolution /
- product ecological environment /
- fitness

HTML全文

参考文献(15)

TSENG M M, JIAO J, MERCHANT E M. Design for mass customization[J]. CIRP Annals-Manufacturing Technology, 1996, 45(1): 153-156.

SIMPSON T W. Product platform design and customization: status and promise[J]. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 2004, 18(1): 3-20.

高飞,肖刚,陈久军. 面向大批量定制的产品族设计方法的现状与趋势[J]. 计算机集成制造系统,2009,15(9): 1665-1672. GAO Fei, XIAO Gang, CHEN Jiujun. Review on product family design for mass customization[J]. Computer Integrated Manufacturing Systems, 2009, 15(9): 1665-1672.

陈珂,殷国富,田大庆. 面向批量定制的产品配置仿真系统实现方法[J]. 四川大学学报:工程科学版,2008,40(4): 181-186. CHEN Ke, YIN Guofu, TIAN Daqing. The implementation methods of configuration simulation system for MC[J]. Journal of Sichuan University: Engineering Science Edition, 2008, 40(4): 181-186.

赵燕伟,苏楠,张峰,等. 基于可拓实例推理的产品族配置设计方法[J]. 机械工程学报,2010,46(15): 146-154. ZHAO Yanwei, SU Nan, ZHANG Feng, et al. Configuration design method for product family based on extension case reasoning[J]. Journal of Mechanical Engineering, 2010, 46(15): 146-154.

BRYAN A, KO J, HU S J, et al. Co-evolution of product families and assembly systems[J]. CIRP Annals-Manufacturing Technology, 2007, 56(1): 41-44.

CHEN Chunbao, WANG Liya. Multiple-platform based product family design for mass customization using a modified genetic algorithm[J]. Journal of Intelligent Manufacturing, 2008, 19(5): 577-589.

程强,刘志峰,蔡力钢,等. 基于公理设计的产品平台规划方法[J]. 计算机集成制造系统,2010,16(8): 1587-1596. CHENG Qiang, LIU Zhifeng, CAI Ligang, et al. Planning method for product platform based on axiomatic design[J]. Computer Integrated Manufacturing Systems, 2010, 16(8): 1587-1596.

王亚馥,戴灼华. 遗传学[M]. 北京:高等教育出版社,2004: 461-462.

WASSENAAR H J, CHEN W. An approach to decision-based design with discrete choice analysis for demand modeling[J]. Journal of Mechanical Design, 2003, 125(3): 490-497.

WASSENAAR H J, CHEN W, CHENG J, et al. Enhancing discrete choice demand modeling for decision-based design[J]. Journal of Mechanical Design, 2005, 127(4): 514-523.

ZHANG M, CHEN Y J, TSENG M M. Distributed knowledge management for product and process variety in mass customization[J]. International Journal of Computer Application in Technology, 2005, 23(1): 13-30.

BLECKER T, ABDELKAFI N. The development of a component commonality metric for mass customization[J]. Transactions on Engineering Management, 2007, 54(1): 70-85.

赵丹,张家泰,舒海生,等.基于双重遗传算法的工件流与刀具流综合调度优化[J]. 西南交通大学学报,2010,45(6): 926-931. ZHAO Dan, ZHANG Jiatai, SHU Haisheng, et al. Double layer genetic algorithm for integrated scheduling optimization of part and tool flows[J]. Journal of Southwest Jiaotong University, 2010, 45(6): 926-931.

JIAO Jianxin, ZHANG Yiyang, WANG Yi. A generic genetic algorithm for product family design[J]. Journal of Intelligent Manufacturing, 2007, 18: 233-247.

施引文献

附加材料(0)

访问统计