Width Error Analysis of Stent Strut and Optimization of Laser Cutting Procedure
-
摘要: 为解决血管支架激光切割中普遍存在筋宽不均匀的问题,通过激光切割工艺试验及对管材的运动分析,得出影响筋宽的主要因素包括系统误差造成的管材切割点切向速度变化和激光离焦量.根据研究结果,优化了激光切割参数.限制管材回转偏心在0.030mm以下,并设置激光离焦量为-0.05mm(设备显示值),筋宽变化幅度控制在0.010mm以内,满足设计要求.Abstract: To solve the problem of uneven strut widths of stents cut by laser, laser cutting procedure test was conducted, and the motion of the tube was analyzed.The results show that the deviation of the strut width is mainly caused by the variation in laser defocus and that in the tangent velocity at the cutting point.The procedure parameters were optimized according to the above analysis.The strut widths of the stent cut with the optimized procedure vary within 0.010 mm, conforming to the design specifications, when the eccentricity of tube at cutting point is within 0.030 mm and the defocus is-0.05 mm.
-
Key words:
- laser cutting /
- strut width /
- procedure parameter /
- procedure test /
- optimization /
- stent
-
王先逵.精密加工技术实用手册[M].北京:机械工业出版社,2001:352.[2] 王涛.古桂茹.李玉祥,等.激光在机械制造技术中的应用[J].激光杂志,2006,27(3):75-76.WANG Tao,GU Guiru,LI Yuxiang,et al.Application of laser in the technology of mechanical nanufacture[J].Laser Journal,2006,27(3):75-76.[3] ETAVE F,FINET G,MAURICE B,et al.Mechanical properties of cornary stent deternined by using finite element analysis[J].Journal of Biomechanics,2001,34:1 065-1 070.[4] 杨杰,黄楠,杜全兴,等.描述血管支架力学性性能的新概念——形状系数[J].生物医学工程学杂志,2006,(1):74-77.YANG Jie,HUANG Nan,DU Quanxing,et al.Shape coefficient-A new concept to describe the vascular stent mechanical property[J].Journal of Biomedical Engineering,2006,(1):74-77.[5] ROGERS C,TSENG D Y,SQUIRE J C,et al.Balloon-artery interactions during stent placement:a finite element analysis approach to pressure,compliance,and stent design as contributors to vascular injury[J].Circ.Res.,1999,84(4):378-385.[6] 张康年.激光加工技术[M].北京:化学工业出版社,2004:38.[7] MCGARRY J P,O DONNELL B P,MCHUGH P E,et al.Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modeling[J].Computation Materials Science,2004,31:421-438. -
点击查看大图
计量
- 文章访问数: 1497
- HTML全文浏览量: 76
- PDF下载量: 400
- 被引次数: 0
下载: