高效率制备超导涂层导体SmBiO3缓冲层

朱晓垒; 蒲明华; 张红; 赵勇

doi:10.3969/j.issn.0258-2724.2017.03.027

高效率制备超导涂层导体SmBiO3缓冲层

doi: 10.3969/j.issn.0258-2724.2017.03.027

朱晓垒^1,2,
蒲明华^1,2,
张红^1,2,
赵勇^1,2, ,

基金项目:

国家自然科学基金资助项目（NSFC51377138，NSFC51072168）

详细信息

作者简介:
朱晓垒(1984—),男,博士研究生,研究方向为超导材料,电话:15198281564,E-mail:zhuxiaolei578284@163.com

通讯作者:
赵勇(1960—),男,教授,博士,研究方向为超导及磁浮技术和新能源材料,E-mail:yzhao@home.swjtu.edu.cn

计量
- 文章访问数: 446
- HTML全文浏览量: 63
- PDF下载量: 142
- 被引次数: 0
出版历程
- 收稿日期: 2016-05-16
- 刊出日期: 2017-06-25

High-Efficient Preparation of SmBiO3 Buffer Layer for Superconducting Coated Conductors

ZHU Xiaolei^1,2,
PU Minghua^1,2,
ZHANG Hong^1,2,
ZHAO Yong^{1,2
, ,}

摘要

摘要: 为了缩短高温超导涂层导体缓冲层薄膜制备周期，采用自开发的前驱溶液，以乳酸为溶剂，硝酸钐和硝酸铋为溶质，在应由表面氧化外延法所得的衬底（NiO（l00）/NiW）上，用化学溶液沉积快速制备了SmBiO3缓冲层薄膜，研究成相温度对SmBiO3薄膜的影响；在SmBiO3薄膜上沉积YBa2Cu3O7-超导层，检验其效用. 研究结果表明：在798.5 ℃下制备的SmBiO3缓冲层薄膜平整致密，并且高度织构，缓冲层薄膜制备周期缩短到2 h以内；在SmBiO3上所沉积的超导层薄膜超导转变温度为89 K，超导临界电流密度为1.46 MA/cm2（77 K、0 T），达到了某些电力应用要求；该SmBiO3薄膜制备方法可用于高温超导涂层导体的快速制备.
- 涂层导体 /
- 高效化学溶液沉积 /
- SmBiO3缓冲层
Abstract: In order to shorten the preparation period of buffer layer for high-performance coated conductors, SmBiO3 (SBO) buffer films were efficiently deposited on surface-oxidation epitaxy processed NiO(100)/NiW substrates by chemical solution deposition (CSD) method, using a precursor solution prepared by dissolving samarium nitrate and bismuth nitrate precursors in lactic acid. The effect of sintering temperature on the SBO film was systematically studied. Then, the YBa2Cu3O7- (YBCO) superconductive film was deposited on the SBO buffer layer to test its utility. Results show that a highly textured, smooth and dense SBO thin film was obtained at 798.5 ℃, and the SBO thin film could be prepared within a period of less than 2 h. The YBCO superconductive layer was successfully deposited on the SBO layer with a superconducting transition temperature of 89 K and a critical current density of 1.46 MA/cm2 (77 K, 0 T), which could be used in some electric power applications. Therefore, the proposed method for preparing SBO buffer layer can be used for rapid preparation of coated conductors.
- coated conductor /
- high-efficient chemical solution deposition /
- SmBiO3 buffer layer

HTML全文

参考文献(25)

LIU Linfei, LI Yijie, WU Xiang, et al. Development of long REBCO coated conductors by PLD-REBCO/Sputter-CeO2/IBAD-MgO at SJTU and SSTC[J]. IEEE Transactions on Applied Superconductivity, 2015, 25(3): 1-4.

LLOBERAS J, SUMPER A, SANMARTI M, et al. A review of high temperature superconductors for offshore wind power synchronous generators[J]. Renewable and Sustainable Energy Reviews, 2014, 38: 404-414.

LEE S, PETRYKIN V, MOLODYK A, et al. Development and production of second generation high Tc superconducting tapes at SuperOx and first tests of model cables[J]. Superconductor Science and Technology, 2014, 27(4): 044022.

闻海虎. 新型高温超导材料研究进展[J]. 材料研究学报,2015,29(4): 241-254. WEN Haihu. Development of research on new high temperature superconductors[J]. Chinese Journal of Material Research, 2015, 29(4): 241-254.

SIEGAL M P, CLEM P G, DAWLEY J T, et al. All solution-chemistry approach for YBa2Cu3O7- coated conductors[J]. Applied Physics Letters, 2002, 80(15): 2710-2712.

WANG Sansheng, WANG Lin, GU Bingfu. High quality YBCO film growth on SrTiO3-buffered LaAlO3 substrate by full solution method[J]. Journal of Materials Science Technology, 2008, 24(6): 899-902.

EL-KAWNI M I, OKUYUCU H, ASLANOGLU Z, et al. Growth and gharacterization of YBCO films on textured Gd2O3 buffer-layered Ni Tapes: All sol-gel process[J]. Journal of superconductivity, 2003, 16(3): 533-536.

COLL M, GAZQUEZ J, HUHNE R, et al. All chemical YBa2Cu3O7 superconducting multilayers: critical role of CeO2 cap layer flatness[J]. Journal of Materials Research, 2009, 24(4): 1446-1455.

AKIN Y, ASLANOGLU Z, CELIK E, et al. Textured growth of multi-layered buffer layers on Ni tape by sol-gel process[J]. IEEE Transactions on Applied Superconductivity, 2003, 13(2): 2673-2676.

JIN Lihua, FENG Jianqing, YU Zeming, et al. Evolution of precursor in the epitaxial CeO2 films grown by chemical solution deposition[J]. Journal of the European Ceramic Society, 2015, 35(3): 927-934.

NARAYANAN V, DRIESSCHE I V. Effect of polymer inclusion in preparation of thick LZO buffer layers for YBCO coated conductors[J]. Journal of Materials Science Technology, 2013, 29(3): 261-266.

ENGEL S, KNOTH K, HVNE R, et al. An all chemical solution deposition approach for the growth of highly textured CeO2 cap layers on La2Zr2O7 buffered long lengths of biaxially textured Ni-W substrates for YBCO coated conductors[J]. Superconductor Science and Technology, 2005, 18(10): 1385-1390.

MCCLESKEY T M, SHI P, BAUER E, et al. Nucleation and growth of epitaxial metal-oxide films based on polymer-assisted deposition[J]. Chemical Society Reviews, 2014, 43(7): 2141-2146.

KIM J Y, LEE S Y, YANG I S, et al. Raman and infrared spectroscopy of YBa2Cu3O7--BaPbO3 composites[J]. Physica C: Superconductivity, 1998, 308(1): 60-66.

ZHANG Xin, ZHAO Yong, XIA Yudong, et al. Preparation of thick BaZrO3 epitaxial film for coated conductors by polymer-assisted chemical solution deposition method[J]. Journal of Superconductivity and Novel Magnetism, 2014, 27(8): 1879-1884.

秦祖赠,刘自力,葛利,等. 焙烧温度对固相法制备BiYO3可见光催化剂的影响[J]. 工业催化,2010,18(11): 31-35. QIN Zuzeng, LIU Zili, GE Li, et al. Effects of calcination temperature on BiYO3 photocatalyst prepared by solid-state reaction[J]. Industrial CataIysis, 2010, 18(11): 31-35.

邹兴,卢惠民,方克明. 变价稀土氧化物对催化剂性能的影响[J]. 稀土,2000,21(2): 16-18. ZOU Xing, LU Huimin, FANG Kemin. Effect of changeable valence rare earth oxides on catalyst properties[J]. Chinese Rare Earths, 2000, 21(2): 16-18.

ZHANG Xiongjian, JIN Wentao, HAO Sijie, et al. Study of the crystal structures of new buffer materials Bi1-xYxO1.5[J]. Journal of Superconductivity and Novel Magnetism, 2010, 23(6): 1011-1014.

LI Guo, PU Minghua, DU Xiaohua, et al. A new single buffer layer for YBCO coated conductors prepared by chemical solution deposition[J]. Physica C: Superconductivity, 2007, 452(1): 43-47.

LI Guo, PU Minghua, ZHOU Huaming, et al. Possible new single-buffer layers for YBa2Cu3O7-y coated conductors prepared by chemical solution deposition[J]. Journal of Materials Research, 2007, 22(9): 2398-2403.

岳美琼,魏贤华,滕元成,等. 沉积温度对高温超导带材YBiO3缓冲层外延生长的影响[J]. 真空科学与技术学报,2009,29(5): 536-540. YUE Meiqiong, WEI Xianhua, TENG Yuancheng, et al. Deposition temperature and YBiO3 buffer layer growth for high temperature superconducting tapes[J]. Chinese Journal of Vacuum Science Technology, 2009, 29(5): 536-540.

熊晓梅,李成山,于泽铭,等. 气氛对YBiO3成相过程的影响[J]. 稀有金属材料与工程,2008(增刊4): 528-532. XIONG Xiaomei, LI Chengshan, YU Zeming, et al. Effects of preparation atmosphere on phase formation of YBiO3[J]. Rare Metal Materials and Engineering, 2008(Sup. 4): 528-532.

POLLEFEYT G, ROTTIERS S, VERMEIR P, et al. Feasibility study of the synthesis of YBiO3 thin films by aqueous chemical solution deposition as an alternative for CeO2 buffer layers in coated conductors[J]. Journal of Materials Chemistry, 2013, 11: 3613-3619.

欧亚芝,蒲明华,周涛,等. 外延温度对YBCO薄膜结构与性能的影响[J]. 低温与超导,2014, 42(6): 26-31. OU Yazhi, PU Minghua, ZHOU Tao, et al. The influence of sintered temperature on structure and properties of YBCO film[J]. Cryogenics Superconductivity, 2014, 42(6): 26-31.

PATTERSON A L. The scherrer formula for X-ray particle size determination[J]. Physical Review, 1939, 56(10): 978-982.

施引文献

附加材料(0)

访问统计

点击查看大图

计量

文章访问数: 446
HTML全文浏览量: 63
PDF下载量: 142
被引次数: 0

高效率制备超导涂层导体SmBiO3缓冲层

doi: 10.3969/j.issn.0258-2724.2017.03.027

作者简介: 朱晓垒(1984—),男,博士研究生,研究方向为超导材料,电话:15198281564,E-mail:zhuxiaolei578284@163.com

通讯作者: 赵勇(1960—),男,教授,博士,研究方向为超导及磁浮技术和新能源材料,E-mail:yzhao@home.swjtu.edu.cn

计量

出版历程

High-Efficient Preparation of SmBiO3 Buffer Layer for Superconducting Coated Conductors

计量

出版历程

目录

作者简介:
朱晓垒(1984—),男,博士研究生,研究方向为超导材料,电话:15198281564,E-mail:zhuxiaolei578284@163.com

通讯作者:
赵勇(1960—),男,教授,博士,研究方向为超导及磁浮技术和新能源材料,E-mail:yzhao@home.swjtu.edu.cn