• ISSN 0258-2724
  • CN 51-1277/U
  • EI Compendex
  • Scopus 收录
  • 全国中文核心期刊
  • 中国科技论文统计源期刊
  • 中国科学引文数据库来源期刊

“平面支架”实验验证支架力学行为公式

杨杰,  杨基,  徐江,  刘宇杰,  黄楠

downloadPDF
文章导航 > 西南交通大学学报  > 2014 >  27(3): 519-524.
杨杰, 杨基, 徐江, 刘宇杰, 黄楠. “平面支架”实验验证支架力学行为公式[J]. 西南交通大学学报, 2014, 27(3): 519-524. doi: 10.3969/j.issn.0258-2724.2014.03.023
引用本文: 杨杰, 杨基, 徐江, 刘宇杰, 黄楠. “平面支架”实验验证支架力学行为公式[J]. 西南交通大学学报, 2014, 27(3): 519-524. doi: 10.3969/j.issn.0258-2724.2014.03.023
shu
YANG Jie, YANG Ji, XU Jiang, LIU Yujie, HUANG Nan. Verification of Stent Mechanical Formulas by “Planar Stent” Experiment[J]. Journal of Southwest Jiaotong University, 2014, 27(3): 519-524. doi: 10.3969/j.issn.0258-2724.2014.03.023
Citation: YANG Jie, YANG Ji, XU Jiang, LIU Yujie, HUANG Nan. Verification of Stent Mechanical Formulas by “Planar Stent” Experiment[J]. Journal of Southwest Jiaotong University, 2014, 27(3): 519-524. doi: 10.3969/j.issn.0258-2724.2014.03.023
shu

“平面支架”实验验证支架力学行为公式

doi: 10.3969/j.issn.0258-2724.2014.03.023
基金项目: 

国家自然科学基金资助项目（10872176）

Verification of Stent Mechanical Formulas by “Planar Stent” Experiment

    摘要
  • 摘要: 为了验证支架弹性径向刚度公式和塑性极限压力公式的准确性，提出了“平面支架单元”的概念，并根据血管支架真实弯曲单元的结构，制作了相同结构的平面形式支架单元试件.利用MTS材料试验机对平面支架单元试件进行拉伸试验，将试件实验测量的压力-半径曲线与弹性径向刚度和塑性极限压力公式预测的压力曲线对比.结果显示，支架撑开的弹性阶段，实验测量的弹性径向刚度和公式计算的弹性径向刚度差值在3%以内，进入塑性阶段，实验得到的曲线与公式接近. 实验验证了这两个公式准确且精度较高.

     

    Abstract: To verify the formulas of elastic radial stiffness and plastic limit pressure of stents, the conception of "planar stent cell" was proposed and a planar stent specimen was produced according to the real curved structure of an intravascular stent. Tensile experiments of "planar stent cell" were then performed using MTS (material test system) equipment, and the experimental pressure-radial curves were compared with the ones predicted by formulas of elastic radial stiffness and plastic limit pressure. The results show that at the elastic stage of stent expansion, the difference of elastic radial stiffness between experimental measurements and formula-calculated values was less than 3%; at the plastic stage, the two curves obtained by experiment and formula were close. The experiments confirmed the accuracy and precision of the two formulas.

     

    • HTML全文
    • 参考文献(17)
  • ETAVE F, FINET G, BOIVIN M, et al. Mechanical property of coronary stents determined by using finite element analysis[J]. J. Biomechanics, 2001, 34: 1065-1075.
    CHUA S N D, MACDONALD B J, HASHMI M S J. Effects of varying slotted tube (stent) geometry on its expansion behaviour using finite element method[J]. J. Materials Processing Technology, 2004, 155-156: 1764-1771.
    MIGLIAVACCA F, PETRINI L, MONTANARI V, et al. A predictive study of the mechanical behaviour of coronary stents by computer modeling[J]. Med. Eng. Phys., 2005, 27: 13-18.
    WALKE W, PASZENDA Z, FILIPIAK J. Experimental and numerical biomechanical analysis of vascular stent[J]. J. Materials Processing Technology, 2005, 164-165: 1263-1268.
    GERVASO F, CAPELLI C, PETRINI L, et al. On the effects of different strategies in modeling balloon-expandable stenting by means of finite element method[J]. J. Biomechanics, 2008, 41: 1206-1212.
    GARC A A, PE A E, MART NEZ M A. Influence of geometrical parameters on radial force during self-expanding stent deployment. application for a variable radial stiffness stent[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2012, 10: 166-175.
    王晓, 冯海全, 王文雯, 等. 球囊扩张式冠脉支架生物力学性能研究[J]. 中国生物医学工程学报, 2013, 32: 203-210. WANG Xiao, FENG Haiquan, WANG Wenwen, et al. Research on biomechanics properties for balloon-expandable intracoronary stents[J]. Chinese Journal of Biomedical Engineering, 2013, 32: 203-210.
    WANG R, CHANDAR K R. Mechanical response of a metallic aortic stent-part Ⅰ: pressure-diameter relationshiop[J]. Journal of Applied Mechanics, 2004, 71: 697-705.
    程洁, 周啸, 李俐军, 等. 冠脉支架的多功能体外力学性能测试装置及实验研究[J]. 东南大学学报:自然科学版, 2010, 40(2): 341-345. CHENG Jie, ZHOU Xiao, LI Lijun, et al. In-vitro test apparatus and experimental study of mechanics properties of coronary stents[J]. Journal of Southeast University: Natural Science Edition, 2010, 40(2): 341-345.
    YANG J, HUANG N. Mechanical formula for the plastic limit pressure of stent during expansion[J]. Acta Mechanica Sinica, 2009, 6: 795-801.
    YANG J, HUANG N. Formula for elastic radial stiffness of the tubular vascular stent[C]//6th World Congress on Biomechanics. Singapore:[s.n.], 2010: 1435-1438.
    DOMOULIN C, COCHELIN B. Mechanical behaviour modelling of balloon-expandable stents[J]. Journal of Biomechanics, 2000, 33: 1461-1470.
    PARK W P, CHO S K, KO J Y, et al. Evaluation of stent performances using FEA considering a realistic balloon expansion[J]. Proceedings of World Academy of Science: Engineering & Technolog, 2008, 37: 117-122.
    DUERIG TW, WHOLEY M. A comparison of balloon-and self-expanding stents[J]. Min Invas Ther & Allied Technol, 2002, 11(4): 173-178.
    MAEKAWA Y, ASAKURA Y, ANZAI T, et al. Relation of stent overexpansion to the angiographic no-reflow phenomenon in intravascular ultrasound-guided stent implantation for acute myocardial infarction[J]. Heart Vessels, 2005, 20: 13-18.
    ALEXANDRE Q, CARLOS A M G, EMERSON C P. Hyperexpansion of coronary stents and clinical outcomes[J]. Texas Heart Institute Journal, 2006, 33: 437-444.
    GREGG W S, FREDERICK G G, JOHN M H. Analysis of the relation between stent implantation pressure and expansion[J]. The American Journal of Cardiology, 1999, 83: 1397-1400.
    • 相关文章
    • 施引文献
  • 附加材料(0)
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  711
  • HTML全文浏览量:  47
  • PDF下载量:  383
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-01-08
  • 刊出日期:  2014-06-25

目录

    /

    返回文章
    返回

    Copyright © 2009 西南交通大学学报

    地址：四川省成都市郫都区犀安路999号西南交通大学犀浦校区《西南交通大学学报》编辑部

    电话：028-66367562传真：028-66366552Email：xbz@home.swjtu.edu.cn

    本系统由 北京仁和汇智信息技术有限公司 开发 技术支持： info@rhhz.net