Analysis of Factors Influencing Longitudinal Force of Welded Turnout on Simply Supported Beam Bridge
-
摘要: 根据桥上无缝道岔纵向相互作用的特点,建立了道岔-桥梁-墩台一体化有限元计算模型,以18号道岔铺设在简支梁桥上为例,分析了钢轨温度、桥梁温度、桥梁跨度、支座布置形式、墩台刚度、辙跟传力部件结构及阻力参数等对简支梁桥上无缝道岔受力与变形的影响.计算结果表明,简支梁桥上的无缝道岔对线路和桥梁的影响范围仅限于与道岔相邻的2孔梁以内;应采用道岔里轨与简支梁伸缩位移方向相反的桥上无缝道岔布置方式;应适当增大道岔范围内桥墩的纵向刚度;桥上无缝道岔辙跟不宜采用间隔铁结构;18号道岔宜铺设在跨度32或48 m的简支梁桥上.Abstract: Based on the characteristic of longitudinal interaction of welded turnout on a bridge,a finite element model for welded turnout-bridge-platform was established.By taking No.18 welded turnout on a simply supported beam bridge as an example,factors influencing its longitudinal force and displacement were analyzed.These factors are the temperature of rail,the temperature of bridge,the length of beam,the layout of support,the stiffness of pier,the structure of frog heel,and the resistance of fastening and ballast.Calculational results show that the influence range of welded turnout on a simply supported beam bridge was within two spans.The arrangement of welded turnout on simply supported beam bridges should make the expansion displacement directions of the turnout lead rail and the beam be opposite.The longitudinal stiffness of piers under welded turnout should be increased,and spacer block should not be adopted as the frog heel of welded turnout on a simply supported beam bridge.The No.18 welded turnout is suitable for laying on a simply supported beam bridge with a span of 32 or 48 m.
-
王平.无缝道岔群对钢轨位移和纵向力的影响研究[J].铁道学报,2002,24(2):74-78.WANG Ping.Study on influences of welded turnout group on displacements and longitudinal forces of rail[J].Journal of the China Rail Society,2002,24(2):74-78.[2] 蒋金洲.桥上无缝线路钢轨附加纵向力及其对桥梁墩台的传递[J].中国铁道科学,1998,44(2):67-75.JIANG Jinzhou.Additional longitudinal forces in continuously welded rails mad their transmission on railway bridge[J].China Railway Science,1998,44(2):67-75.[3] 王平,杨荣山,刘学毅.无缝道岔铺设于长大连续梁桥上时的受力与变形分析[J].交通运输工程与信息学报,2004,2(3):16-21.WANG Ping,YANG Rongshan,LIU Xueyi.Analysis on the influence of seamless turnout on large continuous bridge[J].Journal of Transportation Engineering and Information,2004,2(3):16-21.[4] 刘衍峰,高亮,冯雅薇.桥上无缝道岔受力与变形的有限元分析[J].北京交通大学学报,2006,30(1):66-70.LIU Yanfeng,GAO Liang,FENG Yawei.Finite element analysis of jointless turnout on bridge[J].Journal of Beijing Jiaotong University,2006,30(1):66-70.[5] 铁道科学研究院.新建铁路桥上无缝线路设计暂行规定[R].北京:铁道科学研究院,2003.[6] 西南交通大学.跨区间无缝线路元缝道岔设计方法的优化研究报告[R].成都:西南交通大学,2003. -
点击查看大图
计量
- 文章访问数: 1565
- HTML全文浏览量: 66
- PDF下载量: 405
- 被引次数: 0
下载: