基于Petri网的CONWIP控制系统的建模与仿真

康杰; 李良

基于Petri网的CONWIP控制系统的建模与仿真

康杰¹,
李良²

详细信息

作者简介:
康杰(1973- ),男,讲师,博士,研究方向为生产管理及管理信息系统,电话:028-89057462,E-mail:hushuikj@126.com

计量
- 文章访问数: 1685
- HTML全文浏览量: 100
- PDF下载量: 44
- 被引次数: 0
出版历程
- 收稿日期: 2007-03-06

Modeling and Simulation of CONWIP Systems Based on Petri Net

KANG Jie¹,
LI Liang²

摘要

摘要: 基于Petri网理论,构建了CONWIP控制系统的分层模型.在此基础上,运用仿真软件Arena,对CONWIP、MRP和Kanban系统的制品数量、平均加工时间、平均作业率等指标进行了分析比较.结果表明:CONWIP系统最优,可有效控制在制品数量和有效利用机器产能.
- CONWIP /
- Petri网 /
- 仿真
Abstract: A hierarchical Petri net model for CONWIP(constant work in process) production control systems was built.Based on this model,the CONWIP system was simulated by software Arena,and compared with the MRP(material requirement planning) system and the Kanban system in terms of the amount of WIP(work in process),average processing time,and average operation ratio.The results show that the CONWIP system is superior to the other two systems,since it can control the amount of WIP effectively and bring the production capacity of machines into full play.
- CONWIP /
- Petri net /
- simulation

HTML全文

参考文献(1)

WALLACE J H,MARK L S.Factory physics:foundation of management[M].北京:清华大学出版社,2002:339-360.[2] SPERMAN M L,WOODRUFF D L,HOPP W J.CONWIP:a pull alternative to Kanban[J].International Journal of Production Research.1990,28(5):879-894.[3] 康杰,任欣欣.精益制造中控制策略的选择[J].西南交通大学学报,2003,38(2):208-211.KANG Jie,REN Xinxin.Selection of control policy for lean manufacture systems[J].Journal of Southwest Jiaotong University,2003,38(2):208-211.[4] 黄敏,汪定伟,王兴伟.CONWIP 生产控制方法[J].控制与决策,1999,14(3):193-198.HUANG Min,WANG Dingwei,WANG Xingwei.CONWIP production control method[J].Control and Decision,1999,14(3):193-198.[5] FRAMINAN J M,GONZALEZ P L.The CONWIP production control system:review and research issues[J].Production Planning Control,2003,3(14):255-265.[6] 林勇,乐晓娟,付秋芳.Push/Pull和 CONWIP/Pull 生产控制模式对比分析[J].工业工程,2006,9(2):6-10.LIN Yong,LE Xiaojuan,FU Qiufang.Comparison and analysis of production control methods of push/pull and CONWIP/Pull[J].Industrial Engineering Journal,2006,9(2):6-10.[7] RODERICK L M,TOLAND J,RODRIGUEZ P.A simulation study of CONWIP versus MRP at westinghouse[J].Computers and Industrial Engineering,1994,26 (2):237-242.[8] 黄敏,王兴伟,汪定伟.某钢厂CONWIP与Kanban及MRP的仿真对比分析[J].系统工程理论方法应用,2000,9(1):5-10.HUANG Min,WANG Dingwei,WANG Xingwei.A simulation analysis of CONWIP,Kanban and MRP in a steel rolling plant[J].Systems Engineering-Theory Methodology Application,2000,9(1):5-10.[9] GILLAND W G.A simulation study comparing performance of CONWIP and bottleneck-based release rules[J].Production Planning and Control,2002,13(2):211-219.[10] 袁崇义.Petri网[M].南京:东南大学出版社,1989:11-17.[11] 张宗茂,叶飞帆.MRPⅡ和JIT两种生产管理系统的比较研究[J].工业工程与管理,1998,3:43-47.ZHANG Zongmao,Ye Feifan.Study of MRP,JIT and MRP/JIT mixed production management methods and their suitability[J].Industrial Engineering and Management,1998,3:43-47.[12] SCHROER B J,BLACK J.T Just-In-Time(JIT),with Kanban,manufacturing system simulation on a microcomputer[J] Simulation,1985,45(2):62-70.[13] DAVID K W,SADOWSKI R P,DAVID S T.Simulation with arena[M].New York:The Mc Graw-Hill Companies,2004:142-152.

施引文献

附加材料(0)

访问统计

点击查看大图

计量

文章访问数: 1685
HTML全文浏览量: 100
PDF下载量: 44
被引次数: 0