Evaluation of Effect of Advection Term in Simulation of Mould Filling by Explicit Algorithm
-
摘要: 为研究Navier-Stokes方程中对流项对粘性流注射模拟结果的影响,在基于矢量化显式算法模拟软件中加入对流作用项.应用修正后的软件模拟两个典型的注射填充过程的算例,并与相应的实验比较.对模拟和实验结果的比较表明,对流项对粘性流注射填充过程和的其中的自由表面形状的模拟结果影响可以忽略.Abstract: To evaluate the effect of an advection term in the Navier-Stokes equation in simulation of the viscous injection flow,the advection term was added in the software that is based on vectorial explicit algorithm.Two typical examples were chosen to test the results of simulation,which were then compared with those by relevant experiments.Comparison of the results obtained by simulations and experiments shows that that the advection term has little effect on the results of injection process simulation and on those of free surface shapes in viscous flow injection.
-
Key words:
- numerical simulation /
- vectorial explicit algorithm /
- advection term /
- experiment /
- mould filling /
- viscous flow
-
成志强,BARRIERE T,柳葆生,等.模腔注射填充的全矢量显式算法[J].西南交通大学学报,2004,39(2):181-184.CHENG Zhiqiang,BARRIERE T,LIU Baosheng,et al.Fully vectorial and explicit algorithm for mould filling[J].Journal of Southwest Jiaotong University,2004,39(2):181-184.[2] CHENG Z,BARRIERE T,LIU B,et al.An efficient vectorized approach for the simulation of 3D processes in metal injection molding[J].J.of Steel and Grid Materials,2004,9:687-692.[3] LIU B,BARRIERE T,GELIN J C.Bi-phasic simulation of metal injection moulding:constitutive determinations[J].Journal of Southwest Jiaotong University (English Edition),2003,11(2):122-130.[4] LAVAL H,QUARTAPELLE L.A fractional step Taylor-Galerkin method for unsteady incompressible flows[J].Int.J.for Numer.Methods in Fluids,1990,11:501-513.[5] DVORAK P,BARRIERE T,LIU B,et al.Experiment in metal injection molding[C]// Proceedings Euro PM2002,Shrewsbuny:European Powder Metallurgy Association,2002:191-195.[6] SATO T,RICHARDSON S M.Numerical simulation of fountain flow problem for viscoelastic fluids[J].Polymer Engineering and Science,1995,35:805-812.[7] BARRIERE T,LIU B,GELIN J C.Analysis of phase segregation effects arising in fluid-particle flows during metal injection molding[J].Int.J.of Forming Process,2001,4(3-4):199-216.
点击查看大图
计量
- 文章访问数: 1596
- HTML全文浏览量: 58
- PDF下载量: 294
- 被引次数: 0