Fatigue Test of Connection between Floor Beams and Monolithic Joints
-
摘要: 对重庆菜园坝长江大桥轨道横梁与整体节点的连结构造细节进行了足尺模型疲劳试验.通过有限元分析,选定了试验节点,确定疲劳荷载上限为660kN,下限为50kN.试验实测应力幅为31.33MPa,加载200万次后,试验模型未出现裂纹.试验结果表明,该桥轨道横梁与整体节点的连接构造细节在其使用寿命期间内不会发生疲劳开裂,疲劳强度满足要求.Abstract: The full-scale fatigue test of connection structure details between floor beams and monolithic joints was carried out on the Caiyuanba Yangtze River bridge in Chongqing.Based on a finite element analysis,the test joints were selected,and the maximum and minimum fatigue loads were determined to be 660 and 50kN respectively.The test shows that no crack occurs in the model surface after two million time fatigue loadings and actual stress amplitude is 31.33MPa.The research shows that in the service life of this bridge structure,all the connection structure details between its floor beams and monolithic joints do not crack due to fatigue,so its fatigue strength meets the requirement.
-
中华人民共和国铁道部大桥工程局.孙口黄河大桥技术总结[M]. 北京:科学技术出版社,1997:109-192.[2] 王嘉弟.钢桥整体节点对接焊缝力学性能分析[J]. 桥梁建设,1997(3):44-49.WANG Jiadi.Analyses of mechanical behaviour for the butt welded joint of the whole node in steel truss bridge[J]. Bridge Construction,1997(3):44-49.[3] 周孟波,秦顺全.芜湖长江大桥大跨度低塔斜拉桥板桁组合结构建造技术[M]. 北京:中国铁道出版社,2004:338-352.[4] 王天亮,王邦楣,潘东发.芜湖长江大桥钢梁整体节点疲劳试验研究[J]. 中国铁道科学,2001,22(5):93-97.WANG Tianliang,WANG Bangmei,PAN Dongfa.Steel beam integral node fatigue test of Wuhu Yangtze River bridge[J]. China Railway Science,2001,22(5):93-97.[5] 英国标准学会.BS5400 钢桥、混凝土桥及结合桥[S]. 成都:西南交通大学出版社,1987.[6] 美国各州公路和运输工作者协会(AASHTO).美国公路桥梁设计规范——荷载与抗力系数设计法[S]. 辛济平,万国朝,张文,等译.北京:人民交通出版社,1998. -
点击查看大图
计量
- 文章访问数: 1714
- HTML全文浏览量: 57
- PDF下载量: 403
- 被引次数: 0
下载: