基于地理坐标的数字地图量算模型
M easurementM odel ofDigitalM aps Based on Geographic Coordinates
-
摘要: 将不同坐标系或投影带地图纳入同一个系统或拼接的较好方法是构建基于地理坐标的数字地图,在基 于地理坐标的数字地图的量算中,由于参考椭球面与地球自然表面之间有一定的距离,导致椭球面上的计算值 与地球自然表面的实测值有一定的差异.考虑到投影面距离地球自然表面越近,投影面上的计算值也就越接近 地球表面的实测值,因此可采用建立抵偿坐标系的方法建立地图量算模型.用于投影的抵偿面是计算对象所在 的平均高程面,用于投影的中央子午线是计算对象所在的平均经线,因此计算结果最接近实测值.该方法(模 型)比较适用于对精度要求较高且工作范围不大的区域.Abstract: To construct a digitalmap based on geographic coordinates is a bettermethod to bring digitalmaps in different coordinate systems or projection zones into one system or joint them. In the measurementof digitalmaps based on geographic coordinates, the deviation between the reference ellipsoid surface and the earth s surface results in the discrepance between the calculating value on the reference ellipsoid surface and the real surveying value on the earth s surface. Because a projection plane ismore close to the earth s surface, the calculating value on the projection plane ismore close the real surveying value on the earth s surface. Therefore, themeasurementmodelofdigitalmapsmay be setup by establishing a compensation coordinate system. In thismode,l the compensation projection plane is the surface ofaverage elevation ofcalculated objects, and the centralmeridian ofprojection is the average longitude line of calculated objects, so the calculating result is most close to the real surveying value. This model (method) is more suitable for the regions with a small area and a requirementofhighmeasuring accuracy.
-
Key words:
- digitalmap /
- geographic coordinate /
- mapmeasurement /
- compensation coordinate system
点击查看大图
计量
- 文章访问数: 1124
- HTML全文浏览量: 47
- PDF下载量: 129
- 被引次数: 0