Citation: | PENG Xiaoqin, HE Fang, ZHANG Le, QI Xuejun, TIAN Yuanyan. Wet Surface Modification of Calcium Silicate Hydrate Superfine Powder[J]. Journal of Southwest Jiaotong University, 2009, 22(4): 595-599. |
彭小芹,赵会星,杨巧,等.水化硅酸钙粉体补强橡胶的性能[J].高分子材料科学与工程,2008,24(8):90.PENG Xiaoqin,ZHAO Huixing,YANG Qiao,et al.Performance of rubber filled with hydrated calcium silicate powder[J].Polymer Materials Science and Engineering,2008,24(8):90-91.[2] 郑水林.粉体表面改性[M].北京:中国建材工业出版社,2003:1-33,65-256.[3] 王训遒,李九菊,蒋登高.铝酸酯偶联剂改性纳米碳酸钙的工艺研究[J].无机盐工业,2005,37(3):26.WANG Xunqiu,LI Jiuju,JIANG Denggao.Study on process of surface modification of nanometer calcium carbonate with aluminate coupling agent[J].Inorganic Chemicals Industry,2005,37(3):26.[4] 彭小芹,何丽娟,刘艳萌.水热法制备水化硅酸钙纳米粉体[J].重庆大学学报,2005,28(5):59-62.PENG Xiaoqin,HE Lijuan,LIU Yanmeng.Hydrated calcium silicate with nm-order size manufactured by using dynamic autoclaved technology[J].Chongqing University,2005,28(5):59-62.[5] 中国石油和化学工业协会.GB/T 19281-2003碳酸钙分析方法[S].北京:中国标准出版社,2003.[6] 汤爱萍,吴满芳,郑典模.碳酸钙改性研究[J].江西化工,2003(1):65.TANG Aipin,WU Manfang,ZHENG Dianmo.Study on calcium carbonate modification[J].Jinangxi Chemical Indastry,2003(1):65.[7] 周斌,李玉梅,志賀聖一.神经网络内燃机排放模型学习样本的选定[J].西南交通大学学报,2002,37(6):661.ZHOU Bin,LI Yumei,SHIGA S.Selection of the learning samples of neural networks for internal-combustion engine emission[J].Journal of Southwest Jiaotong University,2002,37(6):661.[8] 王训遒,周铭,蒋登高.复合偶联剂改性纳米CaCO3工艺研究[J].化工矿物与加工,2005(4):9-12.WANG Xunqiu,ZHOU Ming,JIANG Denggao.Study on process of surface modification of nanometer calcium carbonate with compound coupling agent[J].Industrial Minerals Processing,2005(4):9-12.[9] 杨南如,岳文海.无机非金属材料图谱手册[M].武汉:武汉工业大学出版社,2000:337.[10] 侯云芬.水热合成C-S-H凝胶所用硅质原料的特性研究[J].硅酸盐学报,2000,28(2):114-115.HOU Yunfen.Study on characteristics of siliceous materials used in the synthesis of C-S-H gel[J].Journal of the Chinese Ceramic Society,2000,28(2):114-115.
|