• ISSN 0258-2724
  • CN 51-1277/U
  • EI Compendex
  • Scopus
  • Indexed by Core Journals of China, Chinese S&T Journal Citation Reports
  • Chinese S&T Journal Citation Reports
  • Chinese Science Citation Database
Turn off MathJax
Article Contents
ZHANG Chunguang, SUN Feng, ZHAO Chuan, XU Fangchao, LI Ye, ZHOU Ran, ZHAO Haining, JIN Junjie. Design and Optimization of Positioning Leaf Spring with Variable Cross Section and Two Cantilever Arms for Lunar South Pole Exploration[J]. Journal of Southwest Jiaotong University. doi: 10.3969/j.issn.0258-2724.20250541
Citation: ZHANG Chunguang, SUN Feng, ZHAO Chuan, XU Fangchao, LI Ye, ZHOU Ran, ZHAO Haining, JIN Junjie. Design and Optimization of Positioning Leaf Spring with Variable Cross Section and Two Cantilever Arms for Lunar South Pole Exploration[J]. Journal of Southwest Jiaotong University. doi: 10.3969/j.issn.0258-2724.20250541

Design and Optimization of Positioning Leaf Spring with Variable Cross Section and Two Cantilever Arms for Lunar South Pole Exploration

doi: 10.3969/j.issn.0258-2724.20250541
  • Received Date: 28 Oct 2025
  • Rev Recd Date: 24 Dec 2025
  • Available Online: 03 Nov 2026
  • To meet the positioning requirements of the lunar regolith quantitative sampling unit (LRQSU) for a mission to explore the lunar south pole, a positioning leaf spring with a variable cross section and two cantilever arms was designed, and an iterative optimization method accounting for multiple parameters and objectives was proposed. Integrated inside the drive shaft of the sampling unit, the spring decouples the sampling and sample delivery operations through its radial compliance and high axial stiffness, enabling the unit to perform both functions with a single drive. First, a force analysis model of the spring was established, and an analytical relationship was derived between the bending moment distribution and the parameters of the cantilever cross section. Second, the optimal cantilever profile was determined using a numerical iterative method with an adaptive learning rate. The optimization variables were the shape coefficient and center position of the section profile, along with its minimum height. The design objectives were cantilever length, target load, and target displacement. The relationships among cantilever length, target load, and target displacement were then calculated using the principle of equal optimal stress to guide the selection of the spring configuration. Finally, the design was validated through finite element simulation and stiffness tests at room and cryogenic temperatures. The results show that the maximum stress of the optimized spring decreases from 593.89 MPa to approximately 456 MPa, a reduction of 23.23%, while the safety margin increases from 0.90 to 1.5. The discrepancies between the iterative calculations and simulation results are 0.717% for displacement and 1.35% for stress, respectively, and the spring’s axial stiffness is 99.91 times its radial stiffness. The average loads measured at solid height were 31.20 N over 760 stiffness test cycles at room temperature and 31.04 N over 209 stiffness test cycles at −196 °C. The maximum deviation from the design load of 31 N was 0.65%. Load fluctuations and creep deformation remain stable throughout the tests. The spring weighs 4.5 g, which is 3.5 g less than the conventional positioning mechanism with a ball plunger. The proposed method provides a new approach for designing elastic components for extreme environments, including deep space exploration.

     

  • loading
  • [1]
    吴伟仁, 于登云. 深空探测发展与未来关键技术[J]. 深空探测学报, 2014, 1(1): 5-17. doi: 10.15982/j.issn.2095-7777.2014.01.003

    Wu Weiren, Yu Dengyun. Development of deep space exploration and its future key technologies[J]. Journal of Deep Space Exploration, 2014, 1(1): 5-17. doi: 10.15982/j.issn.2095-7777.2014.01.003
    [2]
    新华社. 中国载人登月初步方案公布计划2030年前实现登月开展科学探索. 2023.
    [3]
    刘益清等. 极端环境下月球建筑设计问题研究. 世界建筑, 2023(11): 第90-95页.
    [4]
    郭弟均, 刘建忠, 张莉, 等. 月球地质年代学研究方法及月面历史划分[J]. 地学前缘, 2014, 21(6): 45-61. doi: 10.13745/j.esf.2014.06.006

    Guo Dijun, Liu Jianzhong, Zhang Li, et al. The methods of lunar geochronology study and the subdivisions of lunar geologic history[J]. Earth Science Frontiers, 2014, 21(6): 45-61. doi: 10.13745/j.esf.2014.06.006
    [5]
    Wang C, Jia Y Z, Xue C B, et al. Scientific objectives and payload configuration of the Chang’E-7 mission[J]. National Science Review, 2024, 11(2): nwad329. doi: 10.1093/nsr/nwad329
    [6]
    谷渊涛, 杨瑞洪, 耿焕, 等. 月壤样品研究进展[J]. 科学通报, 2022, 67(14): 1579-1596. doi: 10.1360/TB-2021-1039

    Gu Yuantao, Yang Ruihong, Geng Huan, et al. Geological processes and products recorded in lunar soils: a review[J]. Chinese Science Bulletin, 2022, 67(14): 1579-1596. doi: 10.1360/TB-2021-1039
    [7]
    Lu X J, Chen J, Ling Z C, et al. Mature lunar soils from Fe-rich and young mare basalts in the Chang’e-5 regolith samples[J]. Nature Astronomy, 2022: 142-151.
    [8]
    刘荣强, 史创, 郭宏伟, 等. 空间可展开天线机构研究与展望[J]. 机械工程学报, 2020, 56(5): 1-12. doi: 10.3901/JME.2020.05.001

    Liu Rongqiang, Shi Chuang, Guo Hongwei, et al. Review of space deployable antenna mechanisms[J]. Journal of Mechanical Engineering, 2020, 56(5): 1-12. doi: 10.3901/JME.2020.05.001
    [9]
    Russo A, Barakali B, Kitsu K I, et al. Origami-inspired self-deployable reflectarray antenna[J]. Acta Astronautica, 2023, 213: 240-251. doi: 10.1016/j.actaastro.2023.08.007
    [10]
    Chu Z R, Deng Z Q, Qi X Z, et al. Modeling and analysis of a large deployable antenna structure[J]. Acta Astronautica, 2014, 95: 51-60. doi: 10.1016/j.actaastro.2013.10.015
    [11]
    Lu R C, Gao H B, Liu Z, et al. Design and analysis of a high-speed planetary rover with an adaptive suspension and spring damper[J]. Acta Astronautica, 2023, 211: 827-843. doi: 10.1016/j.actaastro.2023.07.019
    [12]
    Zou M, Zhu J Z, Wang K, et al. Design and mechanical behavior evaluation of flexible metal wheel for crewed lunar rover[J]. Acta Astronautica, 2020, 176: 69-76. doi: 10.1016/j.actaastro.2020.06.010
    [13]
    Gligor D, Peromingo C, Salgado Sánchez P, et al. Sloshing mitigation in microgravity with moving baffles[J]. Acta Astronautica, 2024, 219: 639-652. doi: 10.1016/j.actaastro.2024.03.047
    [14]
    Li Y Y, Wang Z L, Wang C, et al. Effects of torque spring, CCL and latch mechanism on dynamic response of planar solar arrays with multiple clearance joints[J]. Acta Astronautica, 2017, 132: 243-255. doi: 10.1016/j.actaastro.2016.12.032
    [15]
    Feng Y M, Liu H P, Luo A N, et al. Motion analysis of bending bar tensegrity robot[J]. Journal of Aerospace Engineering, 2024, 37(5): 04024058. doi: 10.1061/JAEEEZ.ASENG-5543
    [16]
    Ren M F, Ma J, Chen J B, et al. Design of three-phalange underactuated end tool for the Chinese space station[J]. Journal of Aerospace Engineering, 2025, 38(4): 04025039. doi: 10.1061/JAEEEZ.ASENG-5998
    [17]
    Liu M, Zhang X M, Fatikow S. Design of flexure hinges based on stress-constrained topology optimization[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2017, 231(24): 4635-4645. doi: 10.1177/0954406216671346
    [18]
    Berselli G, Meng Q L, Vertechy R, et al. An improved design method for the dimensional synthesis of flexure-based compliant mechanisms: optimization procedure and experimental validation[J]. Meccanica, 2016, 51(5): 1209-1225. doi: 10.1007/s11012-015-0276-z
    [19]
    Liu C H, Hsu M C, Chen T L, et al. Optimal design of a compliant constant-force mechanism to deliver a nearly constant output force over a range of input displacements[J]. Soft Robotics, 2020, 7(6): 758-769. doi: 10.1089/soro.2019.0122
    [20]
    Tawhid M A, Savsani V. ∊-constraint heat transfer search (∊-HTS) algorithm for solving multi-objective engineering design problems[J]. Journal of Computational Design and Engineering, 2018, 5(1): 104-119.
    [21]
    Yue Y X, Wang X H, Gu H R, et al. Mission architecture analysis for manned NEA exploration using MAM method[J]. Acta Astronautica, 2020, 168: 256-272. doi: 10.1016/j.actaastro.2019.12.007
    [22]
    姜生元, 唐钧跃, 孙凤, 等. 一种螺旋传动接续式星壤原位采样封装器: CN202211592310.8[P]. 2025-06-13.
    [23]
    Horányi M, Szalay J R, Wang X. The lunar dust environment: concerns for Moon-based astronomy[J]. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2024, 382(2271): 20230075. doi: 10.1098/rsta.2023.0075
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(17)  / Tables(1)

    Article views(9) PDF downloads(11) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return