| Citation: | YUAN Zhiren, ZHU Hao, WU Zitong, HUANG Qianya, BAO Yun, LI Daozheng. Axial Compression Performance of Double-Spliced Composite Shear Walls with Transverse Ribs[J]. Journal of Southwest Jiaotong University. doi: 10.3969/j.issn.0258-2724.20250310 |
To promote the engineering application of composite shear walls in prefabricated structures, a novel double-spliced composite shear wall with transverse ribs was proposed. To investigate the effects of the number of transverse ribs and the stirrup ratio in the boundary elements on the compressive capacity and ductility of this novel wall, axial compression tests were first conducted on three double-spliced composite shear walls with transverse ribs and one cast-in-place shear wall to evaluate their failure modes and mechanical properties. Second, a refined finite element model was developed based on experimental verification to conduct a parametric analysis of the compressive performance of the walls. Finally, an axial compressive capacity calculation formula was established through nonlinear regression analysis by introducing influence factors for the transverse ribs and stirrups. The results show that the double-spliced composite shear walls with transverse ribs exhibit good overall integrity and plastic deformability. The mean peak load reaches 93.12% of that of the cast-in-place specimen, and the walls exhibit a relatively pronounced yielding stage before failure. The axial elastic stiffness of the walls obtained by the equivalent-stiffness superposition method is
| [1] |
汪梦甫, 杨惠迪. 预制混凝土剪力墙结构体系的研究现状与改进策略[J]. 工程抗震与加固改造, 2020, 42(1): 1-9. doi: 10.16226/j.issn.1002-8412.2020.01.001
Wang Mengfu, Yang Huidi. Research advance and improvement strategy of precast concrete shear wall structure system[J]. Earthquake Resistant Engineering and Retrofitting, 2020, 42(1): 1-9. doi: 10.16226/j.issn.1002-8412.2020.01.001
|
| [2] |
李祚华, 田得元, 芦静夫, 等. 全装配式L形截面双面叠合剪力墙抗震性能试验研究[J]. 建筑结构学报, 2025, 46(1): 61-72. doi: 10.14006/j.jzjgxb.2024.0053
Li Zuohua, Tian Deyuan, Lu Jingfu, et al. Experimental study on seismic behavior of fully assembled L-shaped section double-sided composite shear wall[J]. Journal of Building Structures, 2025, 46(1): 61-72. doi: 10.14006/j.jzjgxb.2024.0053
|
| [3] |
李书蓉, 郭智远, 张鑫, 等. 预应力叠合剪力墙抗震性能研究[J]. 振动与冲击, 2025, 44(8): 220-227. doi: 10.13465/j.cnki.jvs.2025.08.024
Li Shurong, Guo Zhiyuan, Zhang Xin, et al. Study on seismic behavior of prestressed concrete composite shear wall[J]. Journal of Vibration and Shock, 2025, 44(8): 220-227. doi: 10.13465/j.cnki.jvs.2025.08.024
|
| [4] |
张鹏飞, 初明进, 钱增志, 等. 钢筋模板一体化剪力墙受弯性能试验研究[J]. 建筑结构学报, 2022, 43(3): 128-137. doi: 10.14006/j.jzjgxb.2019.0762
Zhang Pengfei, Chu Mingjin, Qian Zengzhi, et al. Experimental study on flexural performance of integration of reinforcement and formwork shear walls[J]. Journal of Building Structures, 2022, 43(3): 128-137. doi: 10.14006/j.jzjgxb.2019.0762
|
| [5] |
汪梦甫, 李柳红. 带钢板暗支撑叠合板式剪力墙恢复力模型研究[J]. 地震工程与工程振动, 2023, 43(3): 87-96. doi: 10.13197/j.eeed.2023.0309
Wang Mengfu, Li Liuhong. Study on a hysteretic model of superimposed shear walls with steel plate concealed bracings[J]. Earthquake Engineering and Engineering Dynamics, 2023, 43(3): 87-96. doi: 10.13197/j.eeed.2023.0309
|
| [6] |
常亚峰, 尹文哲, 侯亚鹏, 等. 超高性能混凝土预制板-叠合剪力墙抗震性能研究[J]. 地震工程与工程振动, 2024, 44(3): 96-107. doi: 10.13197/j.eeed.2024.0309
Chang Yafeng, Yin Wenzhe, Hou Yapeng, et al. Study on seismic behavior of ultra-high performance concrete composite shear wall with precast slab[J]. Earthquake Engineering and Engineering Dynamics, 2024, 44(3): 96-107. doi: 10.13197/j.eeed.2024.0309
|
| [7] |
熊焱, 赵国伟, 吴迪, 等. 自密实再生块体混凝土叠合剪力墙抗震性能试验研究[J]. 建筑结构学报, 2022, 43(4): 114-123, 133. doi: 10.14006/j.jzjgxb.2020.0472
Xiong Yan, Zhao Guowei, Wu Di, et al. Experimental study on seismic behavior of composite shear walls filled with demolished concrete lumps and self-compacting concrete[J]. Journal of Building Structures, 2022, 43(4): 114-123,133. doi: 10.14006/j.jzjgxb.2020.0472
|
| [8] |
郭延义, 朱安标, 赵欣. 钢板桁架双面叠合剪力墙及倒T板的制作及运输[J]. 建筑施工, 2022, 44(5): 942-945. doi: 10.14144/j.cnki.jzsg.2022.05.020
Guo Yanyi, Zhu Anbiao, Zhao Xin. Fabrication and transportation of steel plate truss double-sided laminated shear wall and inverted T-plate[J]. Building Construction, 2022, 44(5): 942-945. doi: 10.14144/j.cnki.jzsg.2022.05.020
|
| [9] |
龚祖平, 芮明倬, 李翔, 等. 模块化装配整体式自保温混凝土剪力墙力学性能分析[J]. 土木建筑工程信息技术, 2019, 11(6): 105-112. doi: 10.16670/j.cnki.cn11-5823/tu.2019.06.17
Gong Zuping, Rui Mingzhuo, Li Xiang, et al. Analysis on mechanical performance of modular self-insulated prefabricated concrete shear wall[J]. Journal of Information Technology in Civil Engineering and Architecture, 2019, 11(6): 105-112. doi: 10.16670/j.cnki.cn11-5823/tu.2019.06.17
|
| [10] |
林睿, 李振宝, 王文静, 等. 夹心保温双面叠合剪力墙受力性能研究进展[J]. 建筑结构, 2023, 53(11): 88-96, 142. doi: 10.19701/j.jzjg.20210094
Lin Rui, Li Zhenbao, Wang Wenjing, et al. Research progress on mechanical behavior of double-superimposed shear wall with insulation[J]. Building Structure, 2023, 53(11): 88-96,142. doi: 10.19701/j.jzjg.20210094
|
| [11] |
侯和涛, 叶海登, 马天翔, 等. 叠合整体式混凝土剪力墙轴心受压性能研究[J]. 建筑结构学报, 2016, 37(3): 76-85.
Hou Hetao, Ye Haideng, Ma Tianxiang, et al. Study of integral composite reinforced concrete shear wall subjected to axial loading[J]. Journal of Building Structures, 2016, 37(3): 76-85.
|
| [12] |
虞庐松, 刘彪, 王力, 等. 高寒环境温度下圆钢管混凝土短柱轴压性能试验研究[J]. 土木工程学报, 2023, 56(10): 20-31. doi: 10.15951/j.tmgcxb.22040426
Yu Lusong, Liu Biao, Wang Li, et al. Experimental study on axial compression performance of CFST stub columns under very-cold ambient temperature[J]. China Civil Engineering Journal, 2023, 56(10): 20-31. doi: 10.15951/j.tmgcxb.22040426
|
| [13] |
窦超, 杜彦珂, 杨潇. 可更换波折钢板剪切耗能型柱脚节点的滞回性能分析[J]. 天津大学学报(自然科学与工程技术版), 2024, 57(9): 935-946. doi: 10.11784/tdxbz202310023
Dou Chao, Du Yanke, Yang Xiao. Hysteretic behavior of column base joints with replaceable shear corrugated plates[J]. Journal of Tianjin University, 2024, 57(9): 935-946. doi: 10.11784/tdxbz202310023
|
| [14] |
GB 50010—2010 混凝土结构设计规范[S].
|
| [15] |
Lee J, Fenves G L. Plastic-damage model for cyclic loading of concrete structures[J]. Journal of Engineering Mechanics, 1998, 124(8): 892-900. doi: 10.1061/(ASCE)0733-9399(1998)124:8(892)
|
| [16] |
华昌昊, 方鑫, 顾冬生. 混凝土中灌浆套筒的本构模型研究[J]. 建筑结构, 2024, 54(18): 144-151, 143. doi: 10.19701/j.jzjg.20220281
Hua Changhao, Fang Xin, Gu Dongsheng. Study on constitutive model of grouting sleeve in concrete[J]. Building Structure, 2024, 54(18): 144-151,143. doi: 10.19701/j.jzjg.20220281
|
| [17] |
胡安龙, 尚志鹏, 薛国斌, 等. 局部预应力自复位装配式梁柱节点抗震性能参数影响分析[J]. 工程抗震与加固改造, 2025, 47(5): 62-71. doi: 10.16226/j.issn.1002-8412.2025.05.007
Hu Anlong, Shang Zhipeng, Xue Guobin, et al. Analysis of parameter influence on seismic performance of partially prestressed self-centering precast beam-column joints[J]. Earthquake Resistant Engineering and Retrofitting, 2025, 47(5): 62-71. doi: 10.16226/j.issn.1002-8412.2025.05.007
|
| [18] |
蔡忠奎, 苑溦, 路广, 等. 用于混合配筋节段拼装桥墩抗震设计的骨架曲线模型分析[J]. 建筑科学, 2024, 40(11): 140-150. doi: 10.13614/j.cnki.11-1962/tu.2024.11.017
Cai Zhongkui, Yuan (Mei| Wei), Lu Guang, et al. Analysis of skeleton curve model used for seismic design of hybrid reinforced precast segmental bridge column[J]. Building Science, 2024, 40(11): 140-150. doi: 10.13614/j.cnki.11-1962/tu.2024.11.017
|
| [19] |
ACI Committee 318. Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary[M]. Farmington Hills: American Concrete Institute, 2014.
|
| [20] |
王振领. 新老混凝土粘结理论与试验及在桥梁加固工程中的应用研究[D]. 成都: 西南交通大学, 2007.
|
| [21] |
刘健. 新老混凝土粘结的力学性能研究[D]. 大连: 大连理工大学, 2000.
|
| [22] |
周剑. 预制混凝土空心模剪力墙应用技术研究[D]. 北京: 清华大学, 2015.
|