- ISSN 0258-2724
- CN 51-1277/U
- EI Compendex
- Scopus
- Indexed by Core Journals of China, Chinese S&T Journal Citation Reports
- Chinese S&T Journal Citation Reports
- Chinese Science Citation Database
| Citation: | RAN Yan, ZENG Xiaotong. Evaluation of Meta-Action Maintenance Effects for Electromechanical Products Based on IVIF-DANP[J]. Journal of Southwest Jiaotong University. doi: 10.3969/j.issn.0258-2724.20250088
|
The evaluation of maintenance effects is an important reflection of the maintenance support capability of electromechanical products and a key aspect of maintenance management. Traditional methods are limited in handling high-dimensional data and interactions among indicators, making it difficult to accurately reflect maintenance effects. To solve these problems, a new method for evaluating maintenance effects that integrates interval-valued intuitionistic fuzzy sets (IVIFS) and the DEMATEL-based analytic network process (DANP) was proposed. A multi-level maintenance effect evaluation index system was established based on the simple structure and ease of fault diagnosis of electromechanical product meta-action units. In an interval-valued intuitionistic fuzzy environment, the decision-making trial and evaluation laboratory (DEMATEL) method was applied to analyze interdependencies among indicators, and the analytic network process (ANP) was used to determine their weights. Maintenance effects were quantitatively evaluated and ranked by calculating the weighted distances between candidate maintenance plans and the ideal plan. In a case study involving the worm rotation meta-action unit of a CNC grinding machine, three maintenance methods were comprehensively evaluated and ranked. The stability and feasibility of the method were verified by varying the weights assigned to experts and comparing different methods. The results show that the evaluation model integrating IVIF-DANP can accurately differentiate the relative merits of different maintenance plans.
| [1] |
徐拓. 航空发动机维修保障体系的评估及优化[D]. 天津: 中国民航大学, 2018.
|
| [2] |
Li X L, Ran Y, Zhang G B, et al. Selective maintenance of multi-state series systems considering maintenance quality uncertainty and failure effects[J]. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2021, 235(5): 1363-1374. doi: 10.1177/0954408921996932
|
| [3] |
黎新龙, 姜帅, 陈法法, 等. 考虑故障差异的等周期预防性维修策略优化[J]. 重庆大学学报, 2026, 49(3): 49-58. doi: 10.11835/j.issn.1000-582X.2023.229
Li Xinlong, Jiang Shuai, Chen Fafa, et al. Optimization of an equal-cycle preventive maintenance strategy considering fault differences[J]. Journal of Chongqing University, 2026, 49(3): 49-58. doi: 10.11835/j.issn.1000-582X.2023.229
|
| [4] |
黎新龙, 冉琰, 张根保, 等. 考虑维修效果差异性的顺序预防性维修策略[J]. 上海交通大学学报, 2023, 57(11): 1522-1530. doi: 10.16183/j.cnki.jsjtu.2022.023
Li Xinlong, Ran Yan, Zhang Genbao, et al. Sequential preventive maintenance strategy considering difference of maintenance effect[J]. Journal of Shanghai Jiao Tong University, 2023, 57(11): 1522-1530. doi: 10.16183/j.cnki.jsjtu.2022.023
|
| [5] |
Pang J H, Zhao H, Qin F F, et al. A new approach for product quality prediction of complex equipment by grey system theory: a case study of cutting tools for CNC machine tool[J]. Advances in Production Engineering & Management, 2019, 14(4): 461-471. doi: 10.14743/apem2019.4.341
|
| [6] |
张馨予, 胡冰, 施端阳, 等. 基于改进AHP-TOPSIS法的雷达装备维修性评估方法[J]. 舰船电子工程, 2021, 41(12): 136-141. doi: 10.3969/j.issn.1672-9730.2021.12.031
Zhang Xinyu, Hu Bing, Shi Duanyang, et al. Maintainability evaluation method of radar equipment based on improved AHP-TOPSIS[J]. Ship Electronic Engineering, 2021, 41(12): 136-141. doi: 10.3969/j.issn.1672-9730.2021.12.031
|
| [7] |
潘尚峰, 卢超, 彭一波. 基于改进BP神经网络的机床基础部件可再制造性评价模型[J]. 中国机械工程, 2016, 27(20): 2743-2748. doi: 10.3969/j.issn.1004-132X.2016.20.009
Pan Shangfeng, Lu Chao, Peng Yibo. Evaluation model for machine tool basic parts remanufacturability based on optimized BP neural network[J]. China Mechanical Engineering, 2016, 27(20): 2743-2748. doi: 10.3969/j.issn.1004-132X.2016.20.009
|
| [8] |
黄祖广, 王舒辉, 王金江, 等. 基于RAMS的数控机床综合评价方法研究[J]. 机械工程学报, 2022, 58(9): 218-230. doi: 10.3901/JME.2022.09.218
Huang Zuguang, Wang Shuhui, Wang Jinjiang, et al. Research on comprehensive evaluation method of CNC machine tools based on RAMS[J]. Journal of Mechanical Engineering, 2022, 58(9): 218-230. doi: 10.3901/JME.2022.09.218
|
| [9] |
罗九林, 郭镇, 李爱民, 等. 改进性维修效果模糊综合评价[J]. 兵器装备工程学报, 2016, 37(7): 69-73. doi: 10.11809/scbgxb2016.07.016
Luo Jiulin, Guo Zhen, Li Aimin, et al. Fuzzy synthetical evaluation on effect of corrective maintenance[J]. Journal of Ordnance Equipment Engineering, 2016, 37(7): 69-73. doi: 10.11809/scbgxb2016.07.016
|
| [10] |
田文, 方琴, 周雪芳, 等. 航路网络关键节点的识别方法[J]. 西南交通大学学报, 2025, 60(1): 233-242. doi: 10.3969/j.issn.0258-2724.20220532
Tian Wen, Fang Qin, Zhou Xuefang, et al. Identification method for key nodes in en-route network[J]. Journal of Southwest Jiaotong University, 2025, 60(1): 233-242. doi: 10.3969/j.issn.0258-2724.20220532
|
| [11] |
朱庆, 郑威鹏, 吴浩宇, 等. 基于模糊贝叶斯网络的隧道围岩富水破碎风险分析方法[J]. 2025, 60(5): 1071-1079.
ZHU Qing, ZHENG Weipeng, WU Haoyu, et al. Risk analysis method of water-rich breakage of tunnel surrounding rock based on fuzzy Bayesian network[J]. Journal of Southwest Jiaotong University, 2025, 60(5): 1071-1079.
|
| [12] |
曾国艳, 徐扬, 陈树伟, 等. 基于多属性决策的一阶逻辑子句选择方法[J]. 西南交通大学学报, 2025, 60(1): 185-193. doi: 10.3969/j.issn.0258-2724.20230023
Zeng Guoyan, Xu Yang, Chen Shuwei, et al. First-order logic clause selection method based on multi-criteria decision making[J]. Journal of Southwest Jiaotong University, 2025, 60(1): 185-193. doi: 10.3969/j.issn.0258-2724.20230023
|
| [13] |
Vaziri RAD M A, Forootan FARD H, Khazanedari K, et al. A global framework for maximizing sustainable development indexes in agri-photovoltaic-based renewable systems: Integrating DEMATEL, ANP, and MCDM methods[J]. Applied Energy, 2024, 360: 122715. doi: 10.1016/j.apenergy.2024.122715
|
| [14] |
Wang Z L, Hu M X, Zhang P, et al. Dynamic risk assessment of high slope in open-pit coalmines based on interval trapezoidal fuzzy soft set method: a case study[J]. Processes, 2022, 10(11): 2168. doi: 10.3390/pr10112168
|
| [15] |
伍冬睿, 曾志刚, 莫红, 等. 区间二型模糊集和模糊系统: 综述与展望[J]. 自动化学报, 2020, 46(8): 1539-1556. doi: 10.16383/j.aas.c200133
Wu Dongrui, Zeng Zhigang, Mo Hong, et al. Interval type-2 fuzzy sets and systems: overview and outlook[J]. Acta Automatica Sinica, 2020, 46(8): 1539-1556. doi: 10.16383/j.aas.c200133
|
| [16] |
Li X L, Ran Y, Chen F F, et al. A maintenance strategy selection method based on cloud DEMATEL-ANP[J]. Soft Computing, 2023, 27(24): 18843-18868. doi: 10.1007/s00500-023-09035-6
|
| [17] |
Zhu X, Ran Y, Zhang G B, et al. Identification of maintenance significant items for machine tools by integrating DEMATEL and MABAC with spherical fuzzy sets[J]. Engineering Applications of Artificial Intelligence, 2023, 126: 107155. doi: 10.1016/j.engappai.2023.107155
|
| [18] |
Huang G Q, Xiao L M, Zhang G B. Improved failure mode and effect analysis with interval-valued intuitionistic fuzzy rough number theory[J]. Engineering Applications of Artificial Intelligence, 2020, 95: 103856. doi: 10.1016/j.engappai.2020.103856
|
| [19] |
Li Y L, Zhang X G, Ran Y, et al. Reliability and modal analysis of key meta-action unit for CNC machine tool[J]. IEEE Access, 2019, 7: 23640-23655. doi: 10.1109/ACCESS.2019.2899623
|
| [20] |
李健, 慕宗燚, 杜彦斌, 等. 基于元动作的数控机床可用性分析方法研究[J]. 中国机械工程, 2023, 34(15): 1848-1855. doi: 10.3969/j.issn.1004-132X.2023.15.009
Li Jian, Mu Zongyi, Du Yanbin, et al. Research on availability analysis method of CNC machine tools based on meta-action[J]. China Mechanical Engineering, 2023, 34(15): 1848-1855. doi: 10.3969/j.issn.1004-132X.2023.15.009
|
| [21] |
孔祥祯, 王永攀, 杨江平. 装备维修质量评价研究综述[J]. 装备制造技术, 2016(9): 66-69, 81. doi: 10.3969/j.issn.1672-545X.2016.09.022
Kong Xiangzhen, Wang Yongpan, Yang Jiangping. Overview of the equipment maintenance quality assessment[J]. Equipment Manufacturing Technology, 2016(9): 66-69,81. doi: 10.3969/j.issn.1672-545X.2016.09.022
|
| [22] |
慕宗燚. 基于运动传递系数的数控机床元动作单元关键质量特性建模与优化技术[D]. 重庆: 重庆大学, 2021.
|
| [23] |
Budak A, Kaya İ, KaraŞan A, et al. Real-time location systems selection by using a fuzzy MCDM approach: an application in humanitarian relief logistics[J]. Applied Soft Computing, 2020, 92: 106322. doi: 10.1016/j.asoc.2020.106322
|
| [24] |
杨志永, 曹茜, 姜杉. 人因可靠性分析的加权CREAM模型[J]. 安全与环境学报, 2021, 21(3): 1197-1202. doi: 10.13637/j.issn.1009-6094.2019.1294
Yang Zhiyong, Cao Xi, Jiang Shan. Weighted cognitive reliability and the error analysis method (CREAM) for human reliability analysis[J]. Journal of Safety and Environment, 2021, 21(3): 1197-1202. doi: 10.13637/j.issn.1009-6094.2019.1294
|
| [25] |
丁泽坚, 孙松涛, 何志文, 等. 基于区间直觉模糊数ANP的体系贡献率计算方法[J]. 系统仿真学报, 2022, 34(11): 2386-2395. doi: 10.16182/j.issn1004731x.joss.21-0597
Ding Zejian, Sun Songtao, He Zhiwen, et al. Contribution rate calculation method to system-of-systems based on interval-valued intuitionistic fuzzy number ANP[J]. Journal of System Simulation, 2022, 34(11): 2386-2395. doi: 10.16182/j.issn1004731x.joss.21-0597
|
| [26] |
张英俊, 马培军, 苏小红, 等. 属性权重不确定条件下的区间直觉模糊多属性决策[J]. 自动化学报, 2012, 38(2): 220-228. doi: 10.3724/SP.J.1004.2012.00220
Zhang Yingjun, Ma Peijun, Su Xiaohong, et al. Multi-attribute decision making with uncertain attribute weight information in the framework of interval-valued intuitionistic fuzzy set[J]. Acta Automatica Sinica, 2012, 38(2): 220-228. doi: 10.3724/SP.J.1004.2012.00220
|
Figures(7) / Tables(13)
DownLoad:
