Citation: | PU Hanjun, XIE Xiaopeng, LIANG Guangchi. Lifting Dynamic Characteristics of Crane with Frequency Control[J]. Journal of Southwest Jiaotong University, 2013, 26(2): 205-210. doi: 10.3969/j.issn.0258-2724.2013.02.003 |
任会礼,王学林,胡于进,等. 起重船吊物系统动力响应仿真分析[J]. 系统仿真学报,2007,19(12): 2665-2668. REN Huili, WANG Xuelin, HU Yujin, et al . Dynamic response simulation of lifting load system of ship-mounted cranes[J]. Journal of System Simulation, 2007, 19(12): 2665-2668.
|
龚苏生,徐长生. 门座起重机臂架系统在起升动载激励下的动态特性研究[J]. 起重运输机械, 2012(7): 36-39. GONG Susheng, XU Changsheng. Research on dynamic characteristics of portal crane's boom system under lifting dynamic load[J]. Hoisting and Conveying Machinery, 2012(7): 36-39.
|
王贡献,沈荣瀛. 起重机臂架在起升冲击载荷作用下动态特性研究[J]. 机械强度,2005(5): 561-566. WANG Gongxian, SHEN Rongying. Study on dynamic properties of the crane jib under lifting shock load[J]. Journal of Mechanical Strength, 2005(5): 561-566.
|
张则强,程文明,钟斌,等. 桥式起重机吊重二自由度摆角模型与仿真[J]. 西南交通大学学报,2006,41(6): 696-699. ZHANG Zeqiang, CHENG Wenming, ZHONG Bin, et al. Model and simulation of angel of two-degree of freedom for overhead[J]. Journal of Southwest Jiaotong University, 2006, 41(6): 696-699.
|
曲永印,邵世煌,谢树林,等. 网络化智能型变频节能起重机系统及其应用[J]. 控制工程,2006,13(3): 230-232. QU Yongin, SHAO Shihuang, XIE Shulin, et al. Network intelligence save-power variable frequency system of crane and its application[J]. Control Engineering of China, 2006, 13(3): 230-232.
|
程文明. 基于PLC模糊控制的桥式起重机变频调速系统的研究. 成都:西南交通大学,2008.
|
秦凡. 门座式起重机变幅机构的变频调速系统研究. 武汉:武汉理工大学,2010.
|
曹玲芝,王红卫,李春文,等. 起重机变频调速控制技术的研究现状及趋势[J]. 微电机,2008,41(3): 62-64. CAO Lingzhi, WANG Hongwei, LI Chunwen, et al. Research status and trend of control policy for crane[J]. Micromotors, 2008, 41(3): 62-64.
|
钟万勰. 结构动力方程的精细时程积分法[J]. 大连理工大学学报,1994,34(2): 131-136. ZHNG Wanxie. On precise time-integration method for structural dynamics[J]. Journal of Dalian University of Technology, 1994, 34(2): 131-135.
|
向宇,黄玉盈,曾革委. 精细时程积分法的误差分析与精度设计[J]. 计算力学学报,2002,19(3): 276-280. XIANG Yu, HUANG Yuying, ZEN Gewei. Error analysis and accuracy design for the precise time-integration method[J]. Chinese Journal of Computational Mechanics, 2002, 19(3): 276-280.
|
胡宗武,顾迪民. 起重机设计计算[M]. 北京:北京科学技术出版社,1989: 70-73.
|
胡宗武,阎以诵. 起重机动力学[M]. 北京:机械工业出版社,1988: 12-50.
|
PU Hanjun, XIE Xiaopeng, LIANG Guangchi,et al. Analysis for dynamic characteristics in load-lifting system of the crane[J]. Procedia Engineering, 2011(6): 586-593.
|
刘竹丽,何佩排,王双喜. 门式起重机的有限元模态分析[J]. 水利电力机械,2006,28(8): 23-26. LIU Zhuli, HE Peipai, WANG Shuangxi. FEA analysis of gantry crane[J]. Water Conservancy & Electric Power Machinery, 2006, 28(8): 23-26.
|
塔娜,饶柱石,李义明,等. 岸桥起重机有限元建模与动态响应分析[J]. 噪声与振动控制,2008(4): 6-8. TA Na, RAO Zhushi, LI Yiming, et al. Analysis of modeling and dynamic response of crane[J]. Noise and Vibration Control, 2008(4): 6-8.
|
[1] | TAN Minyao, CHENG Wenming, LI Hangfei, ZANG Fulian. Free Vibration Analysis of Thin-Walled Box Beam of Crane Considering Distortion[J]. Journal of Southwest Jiaotong University, 2022, 57(5): 1040-1046. doi: 10.3969/j.issn.0258-2724.20200613 |
[2] | WANG Yupu, CHENG Wenming, DU Run, WANG Shubiao, DENG Yong. Bionic Design Method for Crane Box Girder Wind Load Reduction Based on Ostracion-Cubicus[J]. Journal of Southwest Jiaotong University, 2020, 55(3): 664-671. doi: 10.3969/j.issn.0258-2724.20190085 |
[3] | HUANG Qiang, FAN Dongming. Comparison of Short Arc Integral Approach and Average Acceleration Approach in Gravity Field Recovery[J]. Journal of Southwest Jiaotong University, 2013, 26(3): 455-459,480. doi: 10.3969/j.issn.0258-2724.2013.03.010 |
[4] | MA Lili, CHENG Wenming, ZHONG Bin. Research on Load's Tracking Control for Crane's Motor Driving System[J]. Journal of Southwest Jiaotong University, 2013, 26(3): 494-499. doi: 10.3969/j.issn.0258-2724.2013.03.016 |
[5] | FAN Xuanhua, CHEN Pu, MU Wenpin. Two Precise Time-Integration Methods for Structural Dynamic Analysis[J]. Journal of Southwest Jiaotong University, 2012, 25(1): 109-114. doi: 10.3969/j.issn.0258-2724.2012.021.01.018 |
[6] | CHENG Wenming, ZHONG Bin, MA Lili, WU Xiao. Factors Influencing Porformances of Hydraulic Anti-sway System for Container Cranes[J]. Journal of Southwest Jiaotong University, 2008, 21(1): 40-44. |
[7] | ZHONG Bin, CHENG Wenming, MA Lili, WU Xiao. Reconstruction of State Space of the Trolley-Load Dynamic System in Overhead or Gantry Cranes[J]. Journal of Southwest Jiaotong University, 2007, 20(4): 436-441. |
[8] | YU Lanfeng, WANG Jinnuo. Dynamic Optimum Design of Tower Crane Structures[J]. Journal of Southwest Jiaotong University, 2007, 20(2): 206-210. |
[9] | ZHANG Zeqiang, CHENG Wenming, ZHONG Bin, TANG Liansheng. Model and Simulation of Angel of Two-Degree of Freedom for Overhead[J]. Journal of Southwest Jiaotong University, 2006, 19(6): 696-699. |
[10] | CAO Yu-quan, YAN Li-mei, LI Meng-da, YAN Wei-zhong. Slip of Induction Motor with Frequency Speed Control[J]. Journal of Southwest Jiaotong University, 2006, 19(1): 37-41. |
[11] | LIJin-qiao, YUJian-hua. Algorithm of Optimal Active Structural Control Based on Precise Integration[J]. Journal of Southwest Jiaotong University, 2004, 17(1): 77-81. |
[12] | CHENG Wen-ming, WANG Jin-nuo, DENG Bin. The Coupling Relation Between Structural Parameters and Dynamic Indexes of Gantry Crane[J]. Journal of Southwest Jiaotong University, 2002, 15(6): 651-654. |
[13] | XIONGLi, LIDan-ke. Prediction of Fatigue Life of Crane Structures[J]. Journal of Southwest Jiaotong University, 2002, 15(3): 265-268. |
[14] | CHENG Wen-ming, DENG Bin, WANGJin-nuo. Dynamic Characteristics of Gantry Cranes with an Elastic Trolley Frame[J]. Journal of Southwest Jiaotong University, 2001, 14(2): 144-148. |
[15] | Sun Junwu. A Method of Variable Frequency and Variable Speed Control for Single-Phase Capacitor Motors[J]. Journal of Southwest Jiaotong University, 1999, 12(5): 524-528. |